Heath Zenith 598-1067-03 Manuale Utente

Pagina di 24
© 2008 
 
598-1067-03
Wireless Plug-In 
Chime
This  package  includes  (Style  of  push  button  and 
chime may vary from illustration):
•  Wireless plug-in chime
•  Wireless  push  button  with  battery  (Specific
models include 2)
•  Hardware pack
1.  Install alkaline type A23 12 volt push button 
battery (included). Remove back of case by 
pushing in tab on bottom with a small screw-
driver (see Figure 1). See diagram inside push 
button for correct battery orientation. Note: If 
batteries  are  preinstalled,  remove  orange 
battery tab.
2.  Plug in wireless chime. To reduce the risk of 
electrical shock, this equipment has a polar-
ized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet.
Do not attempt to bypass this safety feature.
3.  Test range. Temporarily position push button 
where you want it mounted. Press push button
to verify chime and push button work properly. If
chime does not sound, see Troubleshooting.
Figure 1
  WARNING:  To  prevent  possible 
SERIOUS INJURY or DEATH:
•  NEVER  allow  small  children  near
batteries.
•  If  battery  is  swallowed,  immediately
notify doctor.