Heath Zenith 598-1000-07 Manuale Utente

598-1000-07

1. Install alkaline type A23 12 volt

push  button  battery  (included).
Remove  back  of  case  by  push-
ing  in  tab  on  bottom  with  a  small
screwdriver  (see  Figure  1).  See
diagram  inside  push  button  for
correct battery orientation. Note: If
batteries are preinstalled, remove
orange battery tab.

2. Remove chime cover. Use a

small screwdriver to pry the cover
tabs away from chime base and
remove cover (see Figure 2). Note:
To remove the cover after base is
mounted, firmly grasp cover and
pull.

3. Install 3 alkaline “D” batteries.

Make sure batteries are oriented
properly (see Figure 3).

This package includes (Style of push button and chime may vary from illustration):
• Wireless chime
• Wireless push button with battery
• Hardware pack
This chime requires 3 “D” alkaline batteries (not included). In typical use,
alkaline batteries will last up to three years.

6155 and 6250 Series

Decorative

Wireless Chime

Figure 1

WARNING: To prevent possi-

ble SERIOUS INJURY or DEATH:

• NEVER allow small children

near batteries.

• If battery is swallowed, imme-

diately notify doctor.

Figure 2 - Back of Chime

Horizontal

Keyhole

Vertical

Keyhole

Mounting Holes

Chime Cover Tab (x4)

Chime

Volume

Jumpers

Figure 3 - Inside Chime

Type “D”

him

e Volum