Heath Zenith 598-1172-02 Manuale Utente

Pagina di 20
-3-
598-1172-02
Tune Settings
Your wireless chime has different selectable tunes: 
Ding (one note), Ding-Dong (two note), or West-
minster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong tune 
(or Westminster, when available). This tune can be changed by following the instructions below.
• 
Ding (one note tune) 
  Push button: Add a jumper to location 8.
• 
Ding-Dong (two note tune)
  Push button: Remove jumper from location 8.
  Chime: Remove jumper from location 8.
• 
Westminster (Eight note tune) (Available on selected chimes)
  Push button: Remove jumper from location 8.
  Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recommend the back door 
use the 
Ding tune and the front door use the Ding-Dong tune (or Westminster tune, available 
on selected chimes). Models that include two push buttons will come factory set for front and 
back doors. Decals on the rear of the push button will indicate its setting.
Note: Some models might require the use of 
tweezers to remove and replace the jumpers.
TYPE ‘D’
LR20
TYPE ‘D’
LR20
TYPE ‘D’
LR20
1
 2
 3
 4
 5
 6
 7
 8
VOLUME
Push Button Battery Replacement
Install an alkaline type A23 12 Volt battery. See diagram 
inside push button for correct battery orientation.
Inside Push button
Front of Chime Base
Tune Setting (Not 
used on all models)
Tune Setting
 2  3
 4
  5  6  7 8
Chime Volume 
Control
* Code Settings 
1-7  Must Match 
Both Push button 
and Chime