Heath Zenith 6144 Manuale Utente

© 2008 HeathCo LLC 

 

598-1143-02

This  package  includes  (Style  of  push  button  and 
chime may vary from illustration):
•  Wireless strobe chime
•  Wireless push button with battery
•  Hardware pack

battery (included). Remove back of case by 
pushing in tab on bottom with a small screw-
driver (see Figure 1). See diagram inside push 
button  for  correct  battery  orientation.  Note: 
If  batteries  are  preinstalled,  remove  orange 
battery tab.

2.  Plug in wireless chime. To reduce the risk of 

electrical shock, this equipment has a polar-
ized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet.
Do not attempt to bypass this safety feature.

3.  Test range. Temporarily position push button 

where you want it mounted. Press push button
to verify chime and push button work properly. If
chime does not sound, see Troubleshooting.