DCS BGB131 Manuale Utente
SIDE BURNER BUILT-IN MODEL INSTALLATION
6
INSTALLATION OF SIDE BURNER BUILT-IN:
All
BGB131-BI and BGB132-BI models can be
installed in combustible enclosure with zero
clearance from the back, side and bottom.
clearance from the back, side and bottom.
A minimum of 6” from the back and sides must be
maintained from the Professional Side Burner above
the cooking surface to combustible construction
(see Fig. 02).
maintained from the Professional Side Burner above
the cooking surface to combustible construction
(see Fig. 02).
When determining a suitable location, take into
account concerns such as exposure to wind, proxim-
ity to traffic paths, and keeping any gas supply lines
as short as possible. Locate the Side Burner only in a
well-ventilated area. Never locate the Side Burner in
a garage, breezeway, shed, or other such enclosed
areas.
account concerns such as exposure to wind, proxim-
ity to traffic paths, and keeping any gas supply lines
as short as possible. Locate the Side Burner only in a
well-ventilated area. Never locate the Side Burner in
a garage, breezeway, shed, or other such enclosed
areas.
It is recommended that ventilation holes are provided in the enclosure in the event of a gas leak. The
counter and supporting ledges or deck must be level and flat.
counter and supporting ledges or deck must be level and flat.
IMPORTANT:
Gas fittings, regulator, and installer shut-off valves must be easily accessible.
FIG.02
6"
min.