Heat & Glo LifeStyle 6000TRI Dépliant

1

Heat & Glo  •  Burner Replacement Installation Instructions  •  2187-901 Rev. E  •  2/12

Burner Assembly

 

•  Pilot Bracket

 

•  Additional burner neck (not for all models)

1.  Remove existing logs, grate and burner.

2.  Replace existing pilot bracket with new pilot bracket 

The new pilot bracket is 1/4 inch taller.

3.  Install new burner.

4.   Determine whether or not fi replace is equipped with 

slide mechanism shutter assembly that is adjustable 
from outside the fi rebox.  

       •  If it is not equipped with this assembly, replace burner 

neck on burner assembly with additional burner neck 
included with the kit.   Remove air shutter from old 
burner neck by removing one screw.  Reinstall on 
new burner neck. 

    •   If  it  is equipped with the assembly use burner as   

supplied with the kit.

5.  Install logs according to log placement instructions.

6.  Some models are equipped with refractory.  Trim 

refractory panels to fi t if necessary.

Please contact your Heat & Glo dealer with any questions 

or concerns. 

For the location of your nearest Heat & Glo dealer, 

please visit www.heatnglo.com.

Heat & Glo, a brand of Hearth & Home Technologies Inc. 

7571 215th Street West, Lakeville, MN 55044

www.heatnglo.com