Ricoh AP3800C Manuale Utente
1
1. Replacing Consumables
and Maintenance Kit
Detaching the SR770 (2 Tray Finisher)
There are times when you might have
to detach the 2 Tray Finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
Tray Finisher.
to detach the 2 Tray Finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
Tray Finisher.
AAAA
Hold the handle at the top of the 2
Tray Finisher firmly with one
hand, pull the 2 Tray Finisher
straight out, and let go when it
stops.
Tray Finisher firmly with one
hand, pull the 2 Tray Finisher
straight out, and let go when it
stops.
The 2 Tray Finisher is detached
from the printer.
from the printer.
BBBB
Use both hands to push it straight
back in, and let go when it clicks
into place.
back in, and let go when it clicks
into place.
The 2 Tray Finisher is reattached to
the printer.
the printer.
Important
❒ Be sure to attach the 2 Tray Fin-
isher to the printer after closing
the Duplex Reversal Unit. See
p.2 “Opening and Closing the
Duplex Reversal Unit”.
the Duplex Reversal Unit. See
p.2 “Opening and Closing the
Duplex Reversal Unit”.
ZDJP201J
ZDJP202J
JupP1k_GB_Mainte_F_FM.book Page 1 Thursday, August 22, 2002 4:23 PM