Chamberlain CLT1 Manuale Utente
Universal Garage Door Opener Remote Control
To prevent possible SERIOUS INJURY or DEATH from a moving gate
or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER
or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER
permit children to operate, or play with remote control transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly
adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
Remote
Control
Control
Motor Unit
& Receiver
& Receiver
DIP Switches or
Smart-Learn Button
Smart-Learn Button
External Ceiling or
Wall Mounted Receiver
Wall Mounted Receiver
CLICKER
Model No. CLT1
The Clicker remote can be programmed to operate up to 2
garage door openers or gates, including different brands. All
programming is done using the:
garage door openers or gates, including different brands. All
programming is done using the:
• Brand switches
• Remote control DIP switches
• Remote control push buttons
A and B, and LED indicator
WARNING
CAUTION
WARNING
WARNING
ON
ON
BRAND Switches
UP position is ON
DOWN position is OFF
UP position is ON
DOWN position is OFF
DIP Switches
UP position is ON
DOWN position is OFF
UP position is ON
DOWN position is OFF
NOTE: Use pen or small screwdriver
to move dip switches.
to move dip switches.
Button A
Button B
LED
DIP
Switches
Switches
BRAND
Switches
Switches
Battery
Slide Battery
cover down
to remove
cover down
to remove
PREPARATION
Determine the BRAND of the existing garage door opener or
handheld remote controls. If all remote controls are lost, the
BRAND is located on the ceiling mounted motor unit or on the
external receiver near the flexible wire antenna. Also determine
if your motor unit/receiver system has DIP switches or a
smart-learn button. (Some models require removing the light
lens.) Proceed to Step 1 for your specific BRAND switch. For
further information consult your garage door opener manual.
handheld remote controls. If all remote controls are lost, the
BRAND is located on the ceiling mounted motor unit or on the
external receiver near the flexible wire antenna. Also determine
if your motor unit/receiver system has DIP switches or a
smart-learn button. (Some models require removing the light
lens.) Proceed to Step 1 for your specific BRAND switch. For
further information consult your garage door opener manual.
■ Set brand switches on Clicker
remote. Refer to Table 1.
Step 1 - Set Brand Switch
▼
Table 1 (Brand Switches)
➡
FREQ.
SYSTEM
MHZ
BRAND SWITCHES
STANLEY 10 DIP Switches
310 OFF OFF OFF OFF
MULTI-CODE 10 DIP Switches
300
ON OFF OFF OFF
LINEAR/MOORE-O-MATIC 8 DIP Switches 310 OFF ON
OFF OFF
GENIE 9 DIP Switches
390 OFF OFF
ON
OFF
GENIE 12 DIP Switches
390
ON OFF
ON
OFF
CHAMBERLAIN, SEARS,
LIFTMASTER, MASTER MECHANIC,
OR DO IT 7 Dip Switches
LIFTMASTER, MASTER MECHANIC,
OR DO IT 7 Dip Switches
390
ON OFF OFF
ON
CHAMBERLAIN, SEARS,
LIFTMASTER, MASTER MECHANIC,
OR DO IT 8 Dip Switches
LIFTMASTER, MASTER MECHANIC,
OR DO IT 8 Dip Switches
390 OFF OFF OFF
ON
CHAMBERLAIN, SEARS,
LIFTMASTER, MASTER MECHANIC,
OR DO IT 9 Dip Switches
LIFTMASTER, MASTER MECHANIC,
OR DO IT 9 Dip Switches
390
ON
ON
OFF OFF
CHAMBERLAIN, SEARS,
LIFTMASTER,
MASTER MECHANIC, DO IT:
YELLOW/WHITE/GRAY Smart-Learn Button 390
LIFTMASTER,
MASTER MECHANIC, DO IT:
YELLOW/WHITE/GRAY Smart-Learn Button 390
ON
ON
OFF OFF
Proceed to Step 2.
If you have a Green or Orange/Red Smart-Learn Button
proceed to Step 3.
proceed to Step 3.
CHAMBERLAIN, SEARS,
LIFTMASTER,
MASTER MECHANIC, DO IT,
GREEN Smart-Learn Button
LIFTMASTER,
MASTER MECHANIC, DO IT,
GREEN Smart-Learn Button
390
ON
ON
ON
OFF
CHAMBERLAIN, SEARS,
LIFTMASTER,
MASTER MECHANIC, DO IT:
ORANGE/RED Smart-Learn Button
LIFTMASTER,
MASTER MECHANIC, DO IT:
ORANGE/RED Smart-Learn Button
390 OFF ON
ON
OFF