Regency L234-LP Manuale Utente

Pagina di 40
Regency
®
 L234 Direct Vent Gas Insert
14
INST
ALLA
TION
CONVERSION KIT #536-969 FROM NG TO LP
INSTALLATION
LP Conversion Kit Contains:
Qty.   Part # 
 
Description
1      910-037  
LP Pilot Orifi ce
1      904-163  
Orifi ce #54
1      904-529  
5/32" Allen Key
1      918-590  
LP Conversion Decal
1      908-528  
Red Propane Label
1      918-688  
Instruction Sheet
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER, IF IN DOUBT DO NOT DO THIS CONVERSION!!
LP Conversion instructions for BEFORE UNIT INSTALLATION.
1)  Open the left and right side faceplate 
panels.
2)  Turn off the gas supply.
3)  Remove the bottom louver by pulling out.
4)  Remove the glass door.
 
a)  Pull off the left side spring hook that 
holds the door in place.  While holding the 
hook turn it upside down and place it into 
the middle opening on the top side mounting 
bracket. Repeat for right side
 b) 
 
Swing the door out 45 degrees and lift up 
and out.
5)  Remove the logs if installed.
6)  Remove the brick panels if installed.
7)  Remove the burner by undoing the 3 
screws.
Burner Removed
8)  Remove the burner tray by undoing the 4 
screws.
Burner Tray Removed
Spring Hook
Top Mounting Bracket