Hearth & Home Technologies 839-1390 Manuale Utente

Page  32

                 September 1, 2008

Quadra-Fire · Sapphire · 250-7233H

   To remove the face, loosen the thumb bolt beneath 

the ashlip.

   Lift up on the top of the Front, gently pulling out 

on the bottom.  Set aside in a safe location.

Doors ship attached to the face.  If they have been removed, 
follow instructions below.

Install one door at a time.  Slide the bottom hinge rod into the 
lower hinge box hole on the face.

   Place a washer on the top of the door hinge.  Line 

up the hole in the door hinge and the washer with the hole in 
the hinge box of the face.  Place a gold-plated hinge pin in 
the hole to secure.

Solitaire Front

Quartet Front 

Allen head bolts 
on back of Quartet 
Face - 2 per side.

Hinge Bar-make 
adjustment right 
or left.

Doors are properly aligned at the point of manufacture. 
However, the possibility exists for them to become out of 
alignment during shipping.  To correct this occurance, follow 
the instructions below.

   Back of Quartet Face:  Locate the two Allen head 

bolts connecting the hinge bar to the face.  The hinge bar can 
be adjusted left or right.

   Use a 5/32 in. Allen head wrench and loosen the 

Allen head bolts.  Make necessary adjustment (move hinge to 
right or left, for proper fit and operation of doors, and retighten 
Allen bolts.