Honeywell HZ-519 Manuale Utente

3

Two (2) AAA batteries required.

The HZ-519 is compatible with a Basic or LCD 
Remote Control which can be purchased sepa-
rately at:
www.honeywellconsumerproducts.com

The Remote Control works the same as the cor-
responding buttons on the Control Panel display 
on the heater and will show the appropriate icons 
when the various functions are activated.

• F/C feature functions from only the Power or Set 

Temperature screens.

• Press the F/C button to toggle between Fahrenheit 

and Celsius.

• The Back-lit feature provides light to the heater dis-

play and functions in any power or mode setting.

• Press the Back-lit button to toggle this feature on 

and off.

• Press Power once to turn the heater on.
• Press Power again to turn the heater off.

• Press Mode until the Temperature icon blinks.  The 

current room temperature will appear.

• Use the Up or Down arrows to set the desired temper-

ature.

• The Temperature icon will stop blinking and the cur-

rent room temperature will reappear after the desired 
temperature is set.

• The heater will turn-off shortly after the desired tem-

perature is reached and the Power light above the dis-
play will blink.

• The heater will turn back on when the room tempera-

ture drops approximately 2 degrees below the desired 
temperature.  The Power light will stop blinking and 
will remain lit.

Power

Mode

F/C

Back-Lit

Power

Mode

F/C

Back-Lit