Desa W32WP Manuale Utente

Pagina di 8
Tools required:
•   #2 Phillips driver bit (3 
1
/
2
" min. length)
•  Slotted screw driver
•  Pencil
•  Measuring tape
•  Drill driver
If  any  wood  pieces  are  missing  or  damaged,  contact  the 
dealer  where  you  purchased  this  mantel  for  replacement. 
If hardware is missing or damaged, contact DESA Heating 
Products at 1-866-672-6040 for referral information. You can 
also visit DESA Heating Products’ technical service web site 
at www.desatech.com.
Note:  Gather  all  mantel  pieces  together  before  assembling 
mantel. 
 WARNING: Only use 1 
1
/
4
" screws in pocket holes to 
assemble mantel. Damage to mantel will result if other 
screws are used for this purpose.
 WARNING: Use only 1/2" or 3/4" screws with brack-
ets in hardware pack 118983-01. Damage to mantel will 
result if other screws are used for this purpose.
W32WP
Wall Mantel and Base with Trim
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Important: Read entire instruction sheet before 
assembling or installing mantel kit.
This mantel is only approved for use with any DESA 
Heating Products 32" fireplace system and Dimplex 
Electric Fireplaces. Do not use mantel with any other 
product.
This mantel kit contains the following:
•  Mantel pieces (unassembled)
•  Dimplex electric fireplace kit (unassembled) 119994-02
•  Hardware package  117197-01
•  Bracket hardware kit  118983-01
The hardware package 117197-01 contains the following:
•   32 - 1 
1
4
" Screws
•  2 - 3" Screws
For Dimplex Electric Fireplace Only use the following:
•  14 - 1 
1
/
4
" Screws 
•  2 - Short wood blocks
•  1 - Long wood block
•  1 - Dimplex header
The hardware kit 118983-01 contains the following:
•  13 - Brackets
•  2 - Flat brackets
•  36 - 1/2" or 3/4" Screws
www.desatech.com