Desa W26TU Manuale Utente

www.desatech.com

WARNING: Follow guidelines of paint or finish

manufacturer. Use care when finishing or painting an

unfinished mantel (W26TU only). Do not finish or paint

mantel pieces near running heater or open flame. These

vapors are highly flammable.

IMPORTANT: If you are staining an unfinished mantel (W26TU

only), remove any sawdust, dirt or oils. This will prevent blem-

ishes from appearing under the stain. Stain mantel before

assembling according to manufacturer’s instructions. Apply

sanding sealer.
IMPORTANT: If you are painting an unfinished mantel (W26TU

only), assemble mantel before painting. Follow directions

listed on paint for wood products. Apply base coat and top

coat following directions listed on product.
Note: Gather all mantel pieces together before assembling

mantel.

WARNING: Only use 1

" screws to assemble

mantel. Damage to mantel will result if other screws

are used for this purpose.

W26TU and W26TO

Mantel and Base

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Important: Read entire instruction sheet before
assembling or installing mantel kit.
These mantels are only approved for use with any
DESA Heating, LLC 26" electric and gas fireplace sys-
tems. Do not use mantel with any other product.

This mantel kit contains the following:
•  Mantel pieces - unassembled and numbered as follows:
  #1 Base
  #2 Right Side Assembly
  #3 Left Side Assembly
  #4 Header
  #5 Top
•  Hardware Package
  18 - 1

" Wood Screws

114325-01

* Extra hardware may be included

Tools required:
• Power Screwdriver with #2 Phillips Bit
If any wood pieces are missing or damaged, contact the

dealer where you purchased this mantel for replacement. If

hardware is missing or damaged, contact DESA Heating, LLC

at 1-866-672-6040 for referral information. You can also visit

DESA Heating, LLC’s web site at www.desatech.com.