Merkury Innovations 312795E Manuale Utente

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When 
these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and 
warnings not covered in this section may appear throughout the body of this manual where applicable.

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent 
fire and explosion:

•

Use equipment only in well ventilated area.

•

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop 

cloths (potential static arc). 

•

Keep work area free of debris, including solvent, rags and gasoline.

•

Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes 

are present.

•

Ground all equipment in the work area. See Grounding instructions.

•

Use only grounded hoses.

•

Hold gun firmly to side of grounded pail when triggering into pail.

•

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment 

until you identify and correct the problem.

•

Keep a working fire extinguisher in the work area.

Static charge may build up on plastic parts during cleaning and could discharge and ignite flammable 
vapors. To help prevent fire and explosion:

•

Clean plastic parts only in a well ventilated area.

•

Do not clean with a dry cloth.

•

Do not operate electrostatic guns in equipment work area.

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just 
a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

•

Do not spray without tip guard and trigger guard installed.

•

Engage trigger lock when not spraying.

•

Do not point gun at anyone or at any part of the body.

•

Do not put your hand over the spray tip.

•

Do not stop or deflect leaks with your hand, body, glove, or rag.

•

Follow the Pressure Relief Procedure when you stop spraying and before cleaning, checking, or ser-

vicing equipment. 

•

Tighten all fluid connections before operating the equipment.

•

Check hoses and couplings daily. Replace worn or damaged parts immediately.