NEC RWC-4717 Manuale Utente

MODE button
Each time  MODE button is pressed, the operation
mode is changed in sequence:
COOLING

FAN ONLY

ENERGY SAVING

COOLING

NOTE: After setting the mode, allow 3 
minutes before switching to another mode. 

NOTE: Temperature setting range is from 19

(66

) to 31

(88

).

 

FAN SPEED button
Used to select fan speed in sequence auto, low, 
medium and high. 

SWING button
Used to select start or stop vertical air vanes swinging.

TIMER button
Used to set or cancel timer operation.

When the unit is in operation, you can set OFF TIMER.
When the unit is off, you can set ON TIMER.
Timer setting range is 0 to 24 hours.

If the OFF TIMER is set, the timer LED displays 
the remaining time to turn off the unit for only 
12 seconds, then LED shifts to display set temperature.
 
If the ON TIMER is set, the timer LED displays 
the remaining time to turn on the unit. 

If you want to cancel ON TIMER, press TIMER button again.  

  

Used to set room temperature in COOLING mode or used to set time in TIME R mode.
If the two keys are pressed at the same time,the temperature LED display will alternate between

 and 

.

  

ON/OFF button
The air conditioner will be started when it is energized 
or will be stopped when it is in operation, if you press 
this button.

High fan speed

Medium fan speed 

Low fan speed

Auto fan speed

Cooling

Fan only

Display set temp
Display set timer

Timer

 Above LED lights on when the relevant mode is in used. 

Energy-saving

SWING

OFF

ON

/

MODE

TIMER

  FAN
SPEED

F

HR

C

C

C

HR

But the mark of "

"or"

"you can not change.Usually ,those models used 220V~/50Hz marked with 

"

",others models marked with "

".

5