Friedrich SL22N30B Manuale Utente

Cord Routing Change

FRR054

NOTE:
DECORATIVE FRONT REMOVED USE TOOL PROVIDED.
(SEE FIGURE 29 FOR LOCATION OF TOOL).

ELECTRICAL
CONTROL PANEL

Figure 31

Remove 3 screws as shown from the electrical control panel. Save to
reinstall later.

FRR055

ELECTRICAL CONTROL
PANEL SCREWS (3)

Figure 32

STEP 16.

Carefully pull out electrical control panel 1", but not all the way.

FRR056

1 INCH

Figure 33

STEP 17.

Pull electrical cord strain relief downward until free and rotate
90 degrees to the right.

FRR057

ELECTRICAL CORD
STRAIN RELIEF

90°

Figure 34

STEP 18.

Push electrical cord strain relief back upward into the electrical
control panel.

FRR058

ENSURE THE ELECTRICAL CORD STRAIN RELIEF IS
FLUSH WITH THE TOP OF ELECTRICAL CONTROL PANEL

Figure 35

Unplug unit.

WARNING

Electrical Shock Hazard

Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.

Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.

Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.

For convenience and optimum appearance the direction that the power cord
exits the unit may be changed from left to right by following the procedure
below. Select the exit location on the left or right based on proximity to
the power outlet.