American Power Conversion Central Air Conditioning System Manuale Utente

The first time you apply power to the NetworkAIR IR In-row Precision Air Conditioner the display 
initializes and runs an LED and alarm-tone test.

After start-up, the interface displays the firmware revision number (if the fast start-up is disabled). 
The display interface then scrolls automatically and continuously through nine screens of status 
information.

Press the up or down arrow key to interrupt the automatic scrolling and view a specific status screen. 
To return to the scrolling status screens, press the 

E

SC

 key from the main menu screen.

Control Temp & Humidity

• Temperature and Humidity at the sensors being used to control 

the environment

• Remote Temperature and Humidity (optional)
• Humidity Control Method (dew point or relative humidity)

Cool/Dehum Demands

• Cool Demand % 

Note: If you have more than one cooling coil (i.e., DX and 
MultiCool), the demands are distributed between them.

• Dehumidify Demand %
• Actual Output %

Reheat Demand

• Reheat Status: On/Off 

(Steam, hot water, or hot gas only)

• Reheat Demand % 

(Electric SCR only)

Humidify Demand

• Humidify Demand %
• Humidify Actual %

Group Status

• Number of Systems
• Setpoint Share: On/Off
• Demand Fighting: On/Off

Group Status

• System number
• Role
• State

Active Alarms

• Alarm number
• Module identifier
• Alarm  name
• Time  stamp

Setpoints

• Cool °C (or °F)
• Reheat °C (or °F)

Setpoints

• Dehumidify % RH
• Humidify % RH