Quadra-Fire MTVERNON-AE-CSB Manuale Utente

Pagina di 52
R
www.quadrafire.com
7034-106E
September 1, 2008
MT. VERNON PELLET STOVE  
ADVANCED ENERGY (AE)
O-T L
Tested and 
Listed by
Portland
Oregon USA
OMNI-Test Laboratories, Inc.
C
US
Owner’s Manual 
Installation and 
Operation
Models:
MTVERNON-AE-MBK
MTVERNON-AE-PMH
MTVERNON-AE-CSB
MTVERNON-AE-CWL
Tested and approved for wood pellets, shelled field 
corn, wheat and black oil sunflower seeds. Burning 
of any other type of fuel voids your warranty.
CAUTION
DO NOT DISCARD THIS MANUAL
NOTICE
•  Important operating and 
maintenance instruc-
tions included.
• 
Leave this manual with 
party responsible for use 
and operation.
• 
Read, understand and 
follow these instruc-
tions for safe installa-
tion and operation.
DO NOT
DISCARD
WARNING
Please read this entire manual 
before installation and use of this 
pellet fuel-burning room heater.  
Failure to follow these instructions 
could result in property damage, 
bodily injury or even death.
• 
Do not store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this 
or any other appliance.
•  Do not overfire - If any external part starts to 
glow, you are overfiring. Reduce feed rate.  
Overfiring will void your warranty.
•  Comply with all minimum clearances to com-
bustibles as specified.  Failure to comply may 
cause house fire.
Check building codes prior to installation.
•  Installation MUST comply with local, regional, state and national 
codes and regulations.
•  Consult local building, fire officials or authorities having jurisdic-
tion about restrictions, installation inspection, and permits.
CAUTION
WARNING
Hot glass will cause burns.
•  Do not touch glass until it is cooled
•  NEVER allow children to touch glass
•  Keep children away
•  CAREFULLY SUPERVISE children in same room as 
fireplace.
•  Alert children and adults to hazards of high 
temperatures.
High temperatures may ignite clothing or other 
flammable materials.
• 
Keep clothing, furniture, draperies and other flammable 
materials away.
HOT SURFACES!
Glass and other surfaces are 
hot during operation AND 
cool down.