Quadra-Fire MTVERNON-AE-PMH Manuale Utente

Page  28

7034-106E

September 1, 2008

R

1.  Metallic noise

1.  Noise is caused by metal expanding and contracting as 

it heats up and cools down, similar to the sound pro-
duced by a furnace or heating duct.  This noise does not 
affect the operation or longevity of your appliance.

2.  Ash build-up on glass

2.  This is normal.  Clean the glass.

3.  Glass has turned dirty

3.  Excessive build up of ash.  The lower burn settings will 

produce more ash, the higher burn settings produce 
less.  The more it burns on low the more frequent clean-
ing of the glass is required.

4.  Fire has tall flames with black tails and is lazy

4.  The flame height adjustment needs to be reduced or 

the firepot needs cleaning.  Heat exchanger or exhaust 
blower needs cleaning.

5.  Excessive smokey start-up

5.  Either the firepot is dirty or there is too much fuel at 

start-up and not enough air. 

6.  Large flame at start-up

6.  This is normal.  Flame will settle down once the fire is 

established.  Some smoke is normal.

7.  Mechanical Noise

7.   The floor of the firepot in the auto-clean system may 

make some noise as it scrapes the ash into the ash 
pan.

 Odors and vapors released during initial operation.

•  Curing of high temperature paint.
•  Open windows for air circulation.

Odors may be irritating to sensitive individuals.