Roberts Radio ecologic 7 Manuale Utente

1.  Place your radio on a fl at surface. 

2.  Fully extend the telescopic aerial. The aerial should be fully extended 

and positioned vertically for optimum reception.

 

3.  Plug the cable from the mains adaptor into the DC input socket on 

the rear of your radio (marked 'DC In') ensuring that the plug is pushed 
fully into the socket. Plug the mains adaptor into a wall socket and 
switch on the socket. The display will show "ROBERTS RADIO" for a 
few seconds and then the display will then show "SET CLOCK". During 
this time the radio is scanning to fi nd out which DAB radio stations are 
available. When stations have been found the current time and date 
will appear on the display.

 

Note that the display will not show any scanning message for this fi rst 
scan. 

4.  If no stations are found the display will show the default time and 

date. It may be necessary to relocate your radio to a position giving 
better reception. You should then carry out a scan to fi nd stations as 
described on page 12.

IMPORTANT:  The mains adaptor is used as the means of connecting 
the radio to the mains supply. The mains socket used for the radio must 
remain accessible during normal use. In order to disconnect the radio 
from the mains, the mains adaptor should be removed from the mains 
socket outlet completely.

6