Vertex Standard VX-1700 Manuale Utente
40
NET NUMBER
Put a check mark into the check box to enable
adjustment of its parameter from the transceiv-
er’s set (“menu”) mode.
adjustment of its parameter from the transceiv-
er’s set (“menu”) mode.
AMD MESSAGE PARAMETERS
This parameter programs the Alpha/Numeric mes-
sages in accordance with the AMD definition.
To enter the Alpha/Numeric message, double click
the left mouse button on the desired column, type
the characters of the desired Alpha/Numeric mes-
sage (up to 90 characters), then press the [ENTER]
key to save the programmed “message.”
Put a check mark into the check box to enable ad-
justment of its parameter from the transceiver’s set
(“menu”) mode.
This parameter programs the Alpha/Numeric mes-
sages in accordance with the AMD definition.
To enter the Alpha/Numeric message, double click
the left mouse button on the desired column, type
the characters of the desired Alpha/Numeric mes-
sage (up to 90 characters), then press the [ENTER]
key to save the programmed “message.”
Put a check mark into the check box to enable ad-
justment of its parameter from the transceiver’s set
(“menu”) mode.
CE77 PC Programming Software
"AMD M
ESSAGE
" P
ARAMETERS
"O
THER
S
TATION
A
DDRESS
" P
ARAMETERS
OTHER STATION ADDRESS PARAMETERS
This parameter programs the Net Member’s Alpha/
Numeric identification for the ALE feature.
To enter the Net Member’s Alpha/Numeric identi-
fication, double click the left mouse button on the
desired column, type in the characters of the Alpha/
Numeric identification (up to 15 characters), then
press the [ENTER] key to save the programmed
identification.
Put a check mark into the check box to enable ad-
justment of its parameter from the transceiver’s set
(“menu”) mode.
This parameter programs the Net Member’s Alpha/
Numeric identification for the ALE feature.
To enter the Net Member’s Alpha/Numeric identi-
fication, double click the left mouse button on the
desired column, type in the characters of the Alpha/
Numeric identification (up to 15 characters), then
press the [ENTER] key to save the programmed
identification.
Put a check mark into the check box to enable ad-
justment of its parameter from the transceiver’s set
(“menu”) mode.