Hans Grohe 39115XX1 Istruzioni Di Montaggio



��

���

��

���

��

Maximum incoming water pressure 

145 psi

Recommended incoming pressure 

14.5 - 7 psi

Recommended hot water temperature 

10

o

F - 140

o

F*

Flow rate 

. gpm

The hot and cold supplies must be of equal pressure for proper operation of the faucet.

*Know and follow all applicable local codes when setting the temperature of the water heater.

· 

Rough-in 38111181 (purchased separately) must be installed and the finished wall 

complete before installation of this trim kit.

· 

For best results, Hansgrohe recommends installation by a licensed, professional 

plumber.

· 

No drain is included with this faucet.  Contact the manufacturer of the sink for 

recommendations regarding suitable drains.

· 

Turn the water off at the main before beginning installation.

Recommended tools (not included)

7 mm & 17 mm deep sockets 

1 mm allen wrench 

Teflon

TM

 thread tape

cutting tools

waterproof bathroom sealant, compatible with the wall surface