Triarch 31909 Dépliant

 ASSEMBLY AND MOUNTING INSTRUCTION 

                                         For 31909 

Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and 
identify all parts prior to building the unit. Each part is identified on the drawingfor reference. 
 
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item 
for any reason. Please repack the unit using the original carton and inserts. 
 
STEP 1:Unpack all the parts and Classify them   
according to the illustration shown at the side. 
Place the parts on a scratchfree surface;

 

 

 
STEP 2: Make sure the power is turned off at   
the junction box where the fixture is to be   
installed. Secure the cross bar to the ceiling   
junction box using junction box screws; 
 
STEP 3: Use the wire nuts to connect the   
positive and negative wires. connect the   
ground wire to the junction box ground port; 
 
STEP 4: Secure the canopy to the ceiling   
with the knurled ring. 
 
STEP 5:Install the Loop to the fixture; 
 
STEP 6: Buckle the quick link to the loop; 
 
STEP 7: Attach the glass shade to the fixture 
and fix it using the check ring and the Socket 
ring; 
 
STEP 8: Install the correct bulb (not provided); 

 

 

 

 

 

Loop

Center Rod