Lightolier 26056 Dépliant

ProSpec

™

Track Lighting

Page 1 of 2

PAR56 Line Voltage

Job Information

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

a Genlyte company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • B0705

1. Track Attachment Fitting: Machined aluminum. Polarity is not a concern

with ProSpec track because of its symmetrical positioning of circuits within
the track, adapter is reversed to access one or the other circuit.

2.  Steel Clamping Toggles: 1/8” thick plated steel with 1/4 - 20 thread

secures fixture mechanically to track.

3. Electrical Post: .20 x .032 thick brass contacts enclosed in a high tempera-

ture thermoplastic insulator.

4. Clamping Knobs: Rotation of clamping knobs secures steel clamping tog-

gles to track.

5. Lever: Solid steel. Energizes fixture electrically by 90° rotation.
6. Yoke: 1/8” thick x 1” wide solid steel.
7. Housing: 1/16” thick aluminum.
8.  Lamp Adjustment Knob: Knurled steel. Can be moved in housing slot to

rotate lamp 180°. Knob is tightened to lock lamp in desired position.

9.  Accessory Locking Knob: Knurled steel. Locks accessory cartridge in

desired position after adjustments.

10. Lamp Access Knob: Knurled steel. Locks front housing to fixture.

Loosening provides access for adding accessories and lamp replacement.

11. Stem: 5/8” O.D. x .048” wall steel.
12. Accessory Cartridge: Can be rotated 360° and locked into position.
13. Lamp Guard: Tempered clear glass. Required for safety.
14. Cross Blade: .07” thick x 1 3/8” deep steel blades matte black finish,

removable.

15. Lampholder: High temperature ceramic mogul end prong base with high

temperature #18 gauge fiberglass sleeved wire.

16. Fixture Rotation Knob: High temperature plastic. When loose, allows fix-

ture to be rotated. When tight the fixture is locked into position.

17. Horizontal Lock: Steel collar when tightened locks the fixture in its horizon-

tal position.

18. Lamp Guide: 1/16” thick steel. Ensures lamp is seated properly in fixture.
24. Visual Cutoff: 57° at 0° fixture aiming.

Matte White

ProSpec

™

Track System 

5.6 lbs. (w/lamp, 

PAR56

Matte Black

Ceiling, Vertical Wall and Horizontal Wall

2 lenses & crossblade)

120V Mogul

Matte White

Canopy mounted over a 4” Octagon Junction Box, Ceiling or Wall

5.8 lbs. (w/lamp,

End Prong

Matte Black

(or other electrical box with 3.5” mounting centers. 4 7/8” dia. fixture canopy must cover J-box)

2 lenses & crossblade)

500W max.

Matte White

Pipe Clamp: Fits Round Pipes. 3/4” to 1/12” nominal pipe size. Horizontal or Vertical pipe. 7.5 lbs. (w/lamp,

(not included)

Matte Black

Note: 3/4” nominal pipe measures 1.05” O.D., 1 1/2” nominal pipe measures 1.90” O.D.

2 lenses & crossblade)

All painted finishes are baked enamel.

(2) Accessories max. Use 6 1/4” UV, PF, SY, LF, IR, AS, AS7LS and AL7HC plus 
6 1/4” color filters.

Input to fixture must be 120V rms at 60Hz.
26056PC plugs into grounded parallel blade receptacle.
26056CY fixture wires: 18 ga. stranded SF-1. Supply wire must be rated at least
90°C and min. 6 amps capacity.

UL, I.B.E.W., Not For Residential Use.

10-1/4"

8-5/8"

9-9/16"

7-1/8"

6-1/2

DIA.

8-7/8 

Dia.

6-1/8"

7-7/16"

4-7/8"

ProSpec Track System

6"

6-1/2

DIA.

10-1/2"

19. Canopy: .047 thick

steel.

20. Switch: Tungsten

rated switch allows
fixture to be
switched on or off
without disconnect-
ing wires.

21. Pipe Clamp: Altman 510

malleable cast iron clamp.

22. Male Plug: Grounded

parallel blade plug 3' long
cord.

23. Safety Hook: 1/16" dia.

steel cable with ìSî hook
provides additional support
to structure.

6-1/8"

4-1/8"

4-7/8" Dia.

3/4"

7-1/16

Teflon

®

is a registered trademark of E.I. DuPont.