Lightolier SL111B2 Manuale Utente
Features
Ballast Channel: 0.05" (1.3rnm) min. thick, 1-1/2" x 1-1/2" (38mm x 38mm) brushed
and anodized extruded aluminum ballast channel. Provided with knock-outs and
threaded holes to accept all mounting accessories.
Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover.
Press-fit installation. No visible hardware.
Multi-Function Block (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for
continuous rows and patterns.
Spiral Louver: 0.022" (56mm) to 0.089" (2.3mm) thick painted aluminum. Slide over
the lamp and attach as a ground to the luminaire to operate the lamp properly.
Orbit Louver: 0.015" (0.38mm) thick painted aluminum semi-diffused. Slide over the
lamp and attach as a ground to the luminaire to operate the lamp properly.
Wand: 0.125" (3.2mm) thick brushed and anodized aluminum tubing.
Plug Insert (2): 0.56" (14min) dia. 0.31" (8mm) min, deep. Solid brushed and
anodized aluminum finish. Hide the holes at each end of ballast channel when
luminaire is not row mounted.
Lampholder Housing (2): 0.08" (2mrn) min. thick, 1" (25mm) square brushed and
anodized aluminum with turret style locking socket.
and anodized extruded aluminum ballast channel. Provided with knock-outs and
threaded holes to accept all mounting accessories.
Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover.
Press-fit installation. No visible hardware.
Multi-Function Block (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for
continuous rows and patterns.
Spiral Louver: 0.022" (56mm) to 0.089" (2.3mm) thick painted aluminum. Slide over
the lamp and attach as a ground to the luminaire to operate the lamp properly.
Orbit Louver: 0.015" (0.38mm) thick painted aluminum semi-diffused. Slide over the
lamp and attach as a ground to the luminaire to operate the lamp properly.
Wand: 0.125" (3.2mm) thick brushed and anodized aluminum tubing.
Plug Insert (2): 0.56" (14min) dia. 0.31" (8mm) min, deep. Solid brushed and
anodized aluminum finish. Hide the holes at each end of ballast channel when
luminaire is not row mounted.
Lampholder Housing (2): 0.08" (2mrn) min. thick, 1" (25mm) square brushed and
anodized aluminum with turret style locking socket.
KUBIK 1.5
SL111B2
Page 1 of 5
Louver Stand-Off Unit
Dimensions
Ordering guide
(complete luminaire consist of unit & power feed)
Unit/Louver Cat. No. Shielding Lamp (linear)
Volts
Ballast Type
Finish
SL111B228PIU
120/277V
SL111B228PIH
2-28W T5
347V
Programmed Rapid Start
SL111B254PIU
SPR
120/277V
Units: Brushed and Anodized Aluminum
SL111B254PIH
ORB
347V
Spiral Louver: Textured Light Grey (paint)
SL111B254MZ1
2-54W T5 HO
120V
Orbit Louver: Semi-diffused
SL111B254MZ2
277V
Dimming Mark 10
Anodized Aluminum
SL111B254PCU
120/277V Dimming PowerSpec HDF
Lightolier
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111B2.pdf
Canlyte
www.canlyte.com
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
46-3/16"
(1173mm)
6-1/4"
(158mm)
1"
(25mm)
1-1/2"
(38mm)
Lampholder Housing
Channel Cover
Ballast
Wand
Multi-Function Block
Plug Insert
44-1/2"
(1130mm)
2"
(51mm)
43-1/2"
(1105mm)
1-3/8"
(35mm)
3-1/2"
(89mm)
SPR: Add to unit. The Spiral
louver produces refined, effective
lengthwise shielding to minimize add
to direct view of the light source.
ORB: Add to unit. The Orbit louver
displays perfect balance as it
rotates into any number of positions
from uplight to downlight to wall
washing. (Position shown below).
Lightolier is a Philips group brand