Lightolier 604SQMR Dépliant

a Genlyte company 

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406

Lytecaster Recessed Downlighting 

Page 1 of 2 

Recessed Square Low Voltage 4 x MR16

Alzak Cones
Painted Baffles
Eyeball 
Pinhole
Gimbal 
Elbow

4 x 75W MR16
4 x 75W MR16
4 x 75W MR16
4 x 65W MR16
4 x 75W MR16
4 x 75W MR16

1.  Housing / Plate:  Die-formed 20 ga. Steel, galvanised.Accomodates all 

ceilings up to 2" (51mm) thick. Adjustable from inside Concealed wiring 
channel. 

2.  Face Plate:  Die-formed 20 ga. steel; White painted finish. Inner  

Mounting ring welded to plate to accept 400 series trims. 1/4" (7mm)  
lip all around.

3.  Torsiontite Springs:  For easy installation of faceplate. Insures that face 

plate edges are snug to ceiling.

4.  Mounting Brackets: 6 ga. steel. Use 18" (457mm) mounting bars (optional) 

or with standard 3/4" (19mm), 1-1/2" (38mm) lathing channels (by others) or 
1/2" (13mm) tubing (by others). Adjust horizontally and vertically.

5.  Junction Box:  2" deep ( 51mm) x 4" (102mm) x 3 1/2" (89mm)16 ga. 

galvanized steel. CSA, US certified an UL listed for maximum of   
8 (#12ga.) Integral cable clamp permit attachment of non-metallic  
(#12 or #14 ga.) cable without tools or additional connector.

6  Transformer: Magnetic 150VA, 120/277/347 volt primary, nominal 12 volt 

secondary, class “B“.

7.  Thermal Protector:  Meets CSA/UL requirements. Insulation, if used,must 

be kept 3"  away from luminaire sides and junction box. Do not cover top of 
luminaire.

8.  Socket: Porcelain body; Two-pin (GX5.3 base) Pre-wired with 18 ga.Teflon 

250º leads to junction box. 

9.  Lamp cover: Porcelain body; Two-pin (GX5.3 base) Pre-wired with 18 

ga.Teflon 250º leads to junction box. 

CSA, US; Certified for damp locations.

1950 - 18" Mounting Bar
1951- 31" Mounting Bar
FA10251-WH - Replacement Spacer Ring 

Magnetic transformers may produce audible sound which may be
objectionable in acoustically critical areas. The use of dimmers can further
amplify the sound levels

13"

6 3/4"

32"

11 1/8"

2"

13"

Frame-In Kit

Face Plate