Lightolier C12E28FL-PL Manuale Utente
Job Information
Type:
Job Name:
Cat. No.:
Cat. No.:
Lamp(s):
Notes:
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Reflector: Specular anodized aluminum, 16 ga. Removable from inside
fixture for access to splices and ballast.
2. Lens: Prismatic (C12E28PLWHW) or Fresnel (C12E28FLWHW) lens.
Regressed 2 1/4" from ceiling line.
3. Die-Cast Baffle: Painted white, deep conical step baffle for low brightness,
supports lens. Small Allen-head set screw provides secure attachment for
use where vandal resistant luminaires are required.
use where vandal resistant luminaires are required.
4. Torsiontite Springs: Permit removal of lens assembly without tools.
5. Socket Cup: Heat dissipating die-cast aluminum with medium base pulse
5. Socket Cup: Heat dissipating die-cast aluminum with medium base pulse
rated porcelain socket with nickel plated screw shell. Positive locking attach-
ment, without tools, to reflector assures proper optical alignment of lamp.
ment, without tools, to reflector assures proper optical alignment of lamp.
6. Mounting Frame: 0.048" (18-ga.) galvanized steel, includes pre-installed
mounting bars.
7. Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
notches allow consistent alignment of multiple fixtures.
8. Vertical Adjustment Mechanism: accommodates mounting to virtually
any ceiling system using mounting bars (provided, or 1/2" EMT tubing (by
others). Single locking feature secures all adjustments. Alignment holes
and markings allow fixture to be preset prior to installation.
others). Single locking feature secures all adjustments. Alignment holes
and markings allow fixture to be preset prior to installation.
9. Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to 30"
long; lock securely into position. Built-in locking tabs provide positive attach-
ment to common T-bar systems. Self-centering feature simplifies installation
in 24" O.C. grid systems. Attaches to steel/wood joists without accessories.
ment to common T-bar systems. Self-centering feature simplifies installation
in 24" O.C. grid systems. Attaches to steel/wood joists without accessories.
10. Ballast: Dual voltage (120V/277V) magnetic. Assembly is accessible from
below without tools for inspection and replacement.
11. Junction Box: 0.048" (18ga.) galvanized steel. UL listed for maximum of (8)
No. 12 AWG, 90°C through branch circuit conductors; allows inspection from
below
12. Thermal Protector: (not shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted, CWA or
Super CWA (pulse start) circuit type, high power factor, sound rating “B” (175W
and 250W PS)/sound rating “C” (others), -20°F minimum starting Temperature,
Type 1 Outdoor rating.
Super CWA (pulse start) circuit type, high power factor, sound rating “B” (175W
and 250W PS)/sound rating “C” (others), -20°F minimum starting Temperature,
Type 1 Outdoor rating.
Electrical (Cont.)
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
175W PS MH
M137
120/277
2.20/0.90
205
250W PS MH
M138
120/277
2.80/1.20
290
320W PS MH
M132
120/277
3.40/1.50
370
400W PS MH M135
120/277
4.10/1.80
465
175W MH
M57
120/277
2.00/0.90
205
250W MH
M58
120/277
2.60/1.10
290
400W MH
M59
120/277
3.90/1.70
460
Options and Accessories
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet ”A“.
Emergency: Add suffix E to Reflector Trim and Frame-In Kit. See Spec. Sheet “E”.
Slope Ceiling Adapters: See Specification Sheet SCA.
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame in Kit (F1=120V, F2=277V).
Chicago Plenum: Consult Factory.
Emergency: Add suffix E to Reflector Trim and Frame-In Kit. See Spec. Sheet “E”.
Slope Ceiling Adapters: See Specification Sheet SCA.
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame in Kit (F1=120V, F2=277V).
Chicago Plenum: Consult Factory.
Labels
UL (Suitable for Wet Locations), CSA (magnetic ballast only), I.B.E.W.
For 320W/400W, install fixtures with minimum spacing: 4 feet from
center-to-center of adjacent luminaries; 3 inch from top of luminaire to over-
head building member; 2 feet from luminaire center to side building member.
For 320W/400W, install fixtures with minimum spacing: 4 feet from
center-to-center of adjacent luminaries; 3 inch from top of luminaire to over-
head building member; 2 feet from luminaire center to side building member.
Ceiling Cutout: 12 9/16” (256 mm) Dia.
Reflector Trim
Frame-In Kit
Lamp (Enclosed, Coated)
C12E28PLWHW
Prismatic Lens, White Step Baffle.
C1217MHPU Magnetic, 120V/277V Pulse Start
175W ED28, BT28 PS MH
C1225MHPU Magnetic, 120V/277V Pulse Start
250W ED28, BT28 PS MH
C12E28FLWHW
Fresnel Lens, White Step Baffle.
C1232MHPU Magnetic, 120V/277V Pulse Start
320W ED28, BT28 PS MH
C1240MHPU Magnetic, 120V/277V Pulse Start
400W ED28, BT28 PS MH
C1217MHU
Magnetic, 120V/277V
175W ED28, BT28 MH
C1225MHU
Magnetic, 120V/277V
250W ED28, BT28 MH
C1240MHU
Magnetic, 120V/277V
400W ED28, BT28 MH
11
2
5
8
9
6
7
10
1
3
4
Vertical
Adjustment:
5/8" (16 mm
2 7/8" (73 m
Adjustment:
5/8" (16 mm
2 7/8" (73 m
2" (50 mm) max.
Ceiling Thickness
Ceiling Thickness
13-1/4" (337 mm) Dia.
13-3/4"
(349 mm)
12" (305 mm) Dia.
13" (330 mm)
10-3/4"
(273 mm)
16-3/8" (416 mm)
20" (508 mm) to 30" (762 mm)
21-1/4" (540 mm) 175-250W
23-3/4" (603 mm)
320-400W
Top View
11"
(280 mm)
Calculite
®
HID Lensed Downlight
C12E28FL-PL
Page 1 of 3
12" Aperture, ED28 (Enclosed), Metal Halide, Prismatic or Fresnel Lens