Lightolier C7E170VW Dépliant
9
2
Vertical Adjustment:
5/8" (16 mm) to
2 7/8" (73 mm)
5/8" (16 mm) to
2 7/8" (73 mm)
5
4
9
10
7
2" (50 mm) max.
Ceiling Thickness
Ceiling Thickness
7-3/8" (187 mm) Dia.
3
1
6
8
8-5/8" (200 mm) Dia.
11-7/8"
(301 mm)
Job Information
Type:
Job Name:
Cat. No.:
Cat. No.:
Lamp(s):
Notes:
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides wide
beam distribution.
2. Aperture Cone: Provides 50° visual cut-off to lamp and lamp image;
self-flange in painted white or aperture-matching polished flange. Consult
factory for other finishes.
factory for other finishes.
3. Socket Cup: Galvanized steel, pre-wired with medium base pulse rated
socket. Snaps onto upper reflector for secure attachment without tools; uni-
tized construction assures proper lamp alignment to optics for consistent
performance.
tized construction assures proper lamp alignment to optics for consistent
performance.
4. Mounting Ring: 0.048" (18-ga.) galvanized steel. Designed for vertical
adjustment from above or below. For ceiling from 0" to 2" thick. Center line
notches allow consistent alignment of multiple fixtures.
notches allow consistent alignment of multiple fixtures.
5. Mounting Frame: 0.048" (18-ga.) galvanized steel includes pre-installed
mounting bars.
6. Aperture Cone Retention Springs: Rust resistant springs secure cone in
place for quick, tool-less installation.
7. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
8. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies instal-
lation in 24" O.C. grid systems. Attaches to steel or wood joists without acces-
sories.
attachment to common T-bar systems. Self-centering feature simplifies instal-
lation in 24" O.C. grid systems. Attaches to steel or wood joists without acces-
sories.
9. Ballast: Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).
Accessible from below for inspection and/or replacement without tools.
10.Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors; allows inspection from below.
11.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating “A”,
-5°F minimum starting temperature, Type 1 Outdoor rating.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating “A”,
-5°F minimum starting temperature, Type 1 Outdoor rating.
Electrical (cont.)
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
70W MH
M98/M139
120/277
0.67/0.29
78
100W MH M90/M140
120/277
0.90/0.43
110
150MH
M102
120/277
1.40/0.61
167
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted, HX-HPF
circuit type, high power factor, sound rating "B", -20°F minimum starting
temperature, Type 1 Outdoor rating.
circuit type, high power factor, sound rating "B", -20°F minimum starting
temperature, Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
70W MH
M98/M143
120/277
1.90/0.80
94
100W MH M90/M140
120/277
2.40/1.10
125
150MH
M102
120/277
3.70/1.60
180
Options and Accessories
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec. Sheet "A/E"
Emergency Lamp: Add suffix E to Frame-In Kit and Reflector Trim. See Spec.
Sheet "A/E"
Slope Ceiling Adapters: See Specification Sheet SCA.
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V)
Chicago Plenum: Consult Factory.
Emergency Lamp: Add suffix E to Frame-In Kit and Reflector Trim. See Spec.
Sheet "A/E"
Slope Ceiling Adapters: See Specification Sheet SCA.
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V)
Chicago Plenum: Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W. For 150W, install fixtures with
minimum spacing: 3 feet from center-to-center of adjacent luminaries; 3 inch from
minimum spacing: 3 feet from center-to-center of adjacent luminaries; 3 inch from
top of luminaire to overhead building member;1 1/2 feet from luminaire center to
side building member.
Ceiling Cutout: 8" (203 mm) Dia.
Reflector Trim
Frame-In Kit
Lamp
(Coated, Ceramic MH)
C7E170VW CLW
Specular Clear, White Painted Flange.
C770MHOE1 Electronic 120V / C770MHOE2 Electronic 277V 70W E17, ED17, BD17 (Open Rated)
CLP
Specular Clear, Matching Flange.
C710MHOE1 Electronic 120V / C710MHOE2 Electronic 277V 100W E17, ED17, BD17 (Open Rated)
CCDW Comfort Clear Diffuse, White Painted Flange. C715MHOE1 Electronic 120V / C715MHOE2 Electronic 277V 150W E17, ED17, BD17 (Open Rated)
CCDP
CCDP
Comfort Clear Diffuse, Matching Flange.
C770MHOU Magnetic 120V/277V
70W E17, ED17, BD17 (Open Rated)
CCZW
Champagne Bronze, White Painted Flange.
C710MHOU Magnetic 120V/277V
100W E17, ED17, BD17 (Open Rated)
CCZP
Champagne Bronze, Matching Flange.
C715MHOU Magnetic 120V/277V
150W E17, ED17, BD17 (Open Rated)
Top View
(Magnetic Ballast)
18-5/8" (473 mm)
10-7/8"
(276 mm)
10-1/2"
(267 mm)
8-1/4"
(210 mm)
20" (508 mm) to 30" (762 mm)
9-3/4"
(248 mm)
(248 mm)
Top View
(Electronic Ballast)
10-7/8"
(276 mm)
9-3/4"
(248 mm)
(248 mm)
20" (508 mm) to
30" (762 mm)
30" (762 mm)
11" (280 mm)
(100/150W)
Calculite
®
HID Downlight
C7E170VW
Page 1 of 2
7" Aperture, ED17 (Open Rated) Ceramic Metal Halide, Wide Beam