Chauvet 6000X Manuale Utente

 

 
This function is used to match a specific color across multiple fixtures. It provides the means to offset 
a given color wheel position up to 10° from the default, thus enabling a slight color shift. This setting 
can be stored into the unit and will remain until a {dF.SE} factory default reset is performed.  
 
1.  Set the DMX values on channel 14 between values 064 

and 127. Any number between these two numbers will 
work. 

DMX Channel 

Item 

10 Color 

Wheel 

11 Cyan 
12 Magenta 

2.  The table on the right shows the channels used to 

calibrate the color settings. Adjust the respective channel 
values to achieve desired color shift. 

13 Yellow 

3.  Save the setting by choosing any value between 128 and 191 on channel 14 and hold the values 

for 3 seconds. The setting will be stored into the fixture.  You can re-calibrate as often as you 
wish.  

4.  To remove the calibrated setting you will need to access the fixtures menu display. Find the 

{dF.SE} menu item and proceed to select the “on” setting to reset the fixture to factory defaults. 

 
To maintain optimum performance and minimize wear fixtures should be cleaned frequently.  Usage 
and environment are contributing factors in determining frequency. As a general rule, fixtures should 
be cleaned at least twice a month. Dust build up reduces light output performance and can cause 
overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off 
fixture before conducting maintenance. 
 
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust 
collected on external vents and internal components.  Clean all glass when the fixture is cold with a 
mild solution of glass cleaner or Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue. Apply 
solution to the cloth or tissue and drag dirt and grime to the outside of the lens. Gently polish optical 
surfaces until they are free of haze and lint. Do not to touch the lamp glass when cleaning fixture. Oil 
and dirt can cause damage and premature aging of the lamp. In the event that the lamp is touched or 
becomes dirty, clean the lamps with an alcohol wipe.  
 
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to 
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: 
damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s 
optics. Clean with soft cloth using normal glass cleaning fluid. - Always dry the parts carefully. - Clean 
the external optics at least every 20 days. Clean the internal optics at least every 30/60 days. 

 
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. 
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products 
returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the 
fixture. Be prepared to provide the model number, serial number and a brief description of the cause 
for the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate 
packaging is the customer’s responsibility. CHAUVET reserves the right to use its own discretion to 
repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is always a safe 
method to use. 

 
Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be 
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and 
submit claims with the shipper in the event that a fixture is damaged due to shipping.  Any other claim 
for items such as missing component/part, damage not related to shipping, and concealed damage, 
must be made within seven (7) days of receiving merchandise.  

LEG-6000 User Manual 

 

17 

Revision: 2007-03-06/09:06