Profile 60 AMP BUSWAY Manuale Utente
60 Amp Busway is a continuous, linear power-point for lighting
fixtures that is rated at 300 volts – enabling longer runs on a
single circuit thus decreasing the number of circuits, power feeds and
installation costs.
fixtures that is rated at 300 volts – enabling longer runs on a
single circuit thus decreasing the number of circuits, power feeds and
installation costs.
A full choice of powerfeeds and connectors provide the tools for
unlimited possibilities in busway configurations.
unlimited possibilities in busway configurations.
60 Amp Busway is offered in three voltage types and in one or two
circuits. Voltage can be mixed in two circuit configurations, for
example: Two circuit / two neutral busway with 12 volts on one circuit
and 277 volts on the second circuit. Each circuit is rated @ 60 amps -
300 volts maximum. The housing serves as a 100% capacity ground.
circuits. Voltage can be mixed in two circuit configurations, for
example: Two circuit / two neutral busway with 12 volts on one circuit
and 277 volts on the second circuit. Each circuit is rated @ 60 amps -
300 volts maximum. The housing serves as a 100% capacity ground.
12 Volt • 1 Circuit
120 Volt • 1 Circuit
277 Volt • 1 Circuit
12 / 12 Volt • 2 Circuit
12 / 120 Volt • 2 Circuit
12 / 277 Volt • 2 Circuit
120 / 120 Volt • 2 Circuit
120 / 277 Volt • 2 Circuit
277 / 277 Volt • 2 Circuit
12 Volt
120 Volt
277 Volt
One Circuit or Two Circuit
• 12V, 120V, 277V or any
combination of two voltages
• One or Two 60 Amp Circuits
• One Independent Neutral
per Circuit
• Low 1.41” Height
• 300V Per Circuit Rating
• Continuous Access Slot
• All Aluminum Housing
• Internally Polarized
• Solid Square Copper
Conductors
• Listed
• Durable Powder Coat Finish
60
AMP
BUSWAY
20
AMP
T R A C K
60
AMP
BUSWAY
Circuit
Indicator
Continuous
Insulators
Solid
Copper
Conductors
Solid Aluminum Extrusion
Continuous Access Slot
The 60 Amp Busway Adapter fits inconspicuously
inside the continuous slot of the busway. The
adapter includes a twist-lock lever for secure
mechanical installation. The adapter can tap
either of the two busway circuits. Each adapter
is rated at 15 amps, 300 volts and is individually
fused with an on/off switch. All 60 Amp Busway
sections and adapters are mechanically
interlocked according to system operating
voltage. The adapter’s overcenter mechanism
enables fixtures to rotate up to 370º. The
adapter is included with Profile Series
Machined or Spun Track Fixtures.
inside the continuous slot of the busway. The
adapter includes a twist-lock lever for secure
mechanical installation. The adapter can tap
either of the two busway circuits. Each adapter
is rated at 15 amps, 300 volts and is individually
fused with an on/off switch. All 60 Amp Busway
sections and adapters are mechanically
interlocked according to system operating
voltage. The adapter’s overcenter mechanism
enables fixtures to rotate up to 370º. The
adapter is included with Profile Series
Machined or Spun Track Fixtures.
SURFACE
SUSPENDED
T-BAR
RECESSED / TRIMLESS
PROFILE SERIES 60 AMP BUSWAY