RSA Lighting 12V AR70 Dépliant

www.cooperlighting.com

Thermal
Protector

Separate Wiring

Compartment

18” flexible conduit

4.65”

12.01”

5.47”

7.95”

9.27”

10.96”

4.65”

1.60”

9.25”

4.10” 

7.45” 

Required 

above 

ceiling

45º x 45º

Adjust

Double 
Gimbal

Integral 

Low Voltage 

Transformers

Housing and junction box are aluminum,  

trimless meshplate is steel with powder 

coated finish.  Perforated meshplate 

allows for trimless installation in drywall/

plaster ceilings by allowing the ceiling’s 

mudding compound to be applied right 

up to the edge of the fixture opening.  

Includes a beveled “knife-edge” lips to 

ensure a clean edge. Can accommodate 

various ceiling thickness. 

Thermal protection provided to guard 

against overheating and misuse of 

insulation over and around fixture. Vent 

holes in housing provide cooler operation.

Junction Box is UL listed for through branch 

wiring, 6 #12 90º C supply conductors or 

60º C for end of run. The fixture is also UL 

listed as ‘access above ceiling not required’. 

Integral electronic or magnetic low voltage 

transformers. Transformers and electrical 

are mounted in a separate metal enclosure 

box attached to the junction box with 18” 

of flexible conduit. Transformer enclosure 

includes a separated wiring compartment 

and two knockouts for conduit entry. 

Transformer enclosure features perforated 

metal door for easy maintenance access 

and cooler operation. Entire electrical 

assembly (jbox and transformer enclosure) 

is removable from the housing for easy 

maintenance.

One (1) 12V AR70 lamp mounted in 

adjustable double gimbal. Lamp holder is  

removable and may be regressed 1” for 

additional cut-off. Lamp can accept up to 

three optical accessories (i.e. lens + hex 

louver + snoot). 45º x 45º locking lamp 

adjustment.  Beveled-edge lamp ring is 

secured with threadless, bayonet action. 

Optional retractable arm is available 

for lamp pulldown and extreme aiming. 

Double contact bayonet base sockets 

included.

Mounting clips are provided which 

mount the housing edge flush with the 

finished ceiling line. Mounting clips are 

secured to the housing through the 

meshplate with screws.

 

cULus listed for non-type IC 

applications, suitable for use in damp 

locations.

Ceiling Cut-Out: 5.76” x 5.76”

An adjustable Single-lamp Recessed fixture for trimless installation suitable for 
downlighting and accent applications. Utilizes ONE (1) 12V AR70 lamp.

For remodel applications. Insulation must be kept 3” from all sides and at least 
1” above the housing.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

rev 022408

NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.

  COMBOLIGHT 

Recessed One (1) Light

  Remodel 

  50 Watt max. AR70 12V

   Electronic Low Voltage 

Transformer

   Magnetic Low Voltage 

Transformer

 120V

 277V 

  Double Gimbal 

  Retractable Double Gimbal

  Trimless

  Trimless

  White 

 Black 

 Industrial Silver