American Standard 0530.004SG Dépliant
J39
BARRIER FREE
© 2008 AS America Inc.
FINISHED
WALL
OR
SPLASH BACK
451mm
(17-3/4)
521mm
(20-1/2)
178mm
(7)
76mm
(3)
102mm
(4)
OPTIONAL
C/L
FINISHED
FLOOR
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
203mm
(8)
178mm
(7)
248mm
(9-3/4)
*
COUNTERTOP (BY OTHERS)
187mm
(7-3/8)
13mm
(1/2)
SEALING COMPOUND
SUPPLIES
AS REQ'D.
324mm
(12-3/4)
*
787mm (31)
851mm (33-1/2)
851mm
(33-1/2)
51mm
(2)
610mm
(24)
152mm
(6)
MAX.
BARRIER FREE
CLEARANCE
686mm
(27)
MIN.
203mm
(8)
MIN.
229mm
(9)
MIN.
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
SEYCHELLE™
COUNTERTOP SINK
VITREOUS CHINA
Revised 2/08
SEYCHELLE™ COUNTERTOP SINK
with Scotchgard
with Scotchgard
®
• Stylish, distinctively sculpted countertop sink
• Scotchgard
• Scotchgard
®
finish for easier cleaning
• Made from vitreous china
• Self-rimming with cutout template supplied
• Front overflow
• Faucet shown not supplied
• Self-rimming with cutout template supplied
• Front overflow
• Faucet shown not supplied
❏
0530.004SG Faucet holes on 4" (102mm) centers
(illustrated)
❏
0530.008SG Faucet holes on 8" (203mm) centers
Nominal Dimensions:
521 x 451mm
(20-1/2" x 17-3/4")
521 x 451mm
(20-1/2" x 17-3/4")
Bowl sizes:
406mm (16") wide
254mm (10") front to back
143mm (5-5/8") deep
406mm (16") wide
254mm (10") front to back
143mm (5-5/8") deep
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
Vitreous China Fixtures
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
Vitreous China Fixtures
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
To Be Specified:
❏
❏
Color: ❏ White ❏ Bone
❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏
❏ Fawn Beige ❏ Black
❏
Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available