American Standard Compact 2149.012 Manuale Utente

Putty Knife

Regular Screwdriver

Adjustable Wrench

Sealant

Tape Measure

Hacksaw

Wax Ring/Gasket

Flexible Supply Tube

Closet Bolts

Carpenters Level

a.

Close toilet supply valve and flush tank completely.  Towel or sponge remaining water from tank and bowl.

b.

Disconnect and remove supply line.  NOTE:

 If replacing valve, first shut off main water supply!

c.

Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.

d.

Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: 

 Mounting surface must be clean and level before new toilet is installed!

Install closet bolts in flange channel, turn 90

°

,

and slide into place 6" (152 mm) apart and
parallel to wall.

NOTE: 

 Distance from wall to closet flange centerline must

be as listed below:
    For 4010.010/4310.016 Tanks:  A = 254mm (10")
    For 4014/4314 Tanks:  A = 356mm (14")
    For 4010.012/4392.016 and  all other Tanks:  A = 305mm (12")

CLOSET FLANGE

CLOSET BOLTS

7 3 0 2 3 7 - 1 0 0   R E V .   Q

FINISHED WALL

FINISHED 
FLOOR

SUPPLY

AS

REQ'D.

NOTE:  

Pictures may not exactly define contour of china and components.

P r o d u c t   n a m e s   l i s t e d   h e r e i n   a r e   t r a d e m a r k s   o f   A m e r i c a n   S t a n d a r d   I n c .
©   A m e r i c a n   S t a n d a r d   I n c .   2 0 0 4

Thank you  for selecting American Standard - the benchmark of fine quality for over 100 years.  To ensure this
product is installed properly, please read these instructions carefully before you begin. (Certain installations may
require professional help.) Also be sure your installation conforms to local codes