American Standard 4392.800 Dépliant

K96

© 2008 AS America Inc.

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION 

OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 

of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided pages.

229mm

(9)

19mm ± 6mm

(3/4 ± 1/4)

305mm

(12)

711mm

(28)

C/L OF OUTLET

8

3

m

m

(3

-1

/4

)

FINISHED WALL

381mm

(15)

419mm

(16-1/2)

C/L

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

308mm

(12-1/8)

159mm

(6-1/4)

16mm

(5/8)

FINISHED 

FLOOR

743mm

(29-1/4)

235mm

(9-1/4)

152mm

(6)

508mm

(20)

203mm

(8)

SUPPLY

AS

REQ'D

365mm

(14-3/8)

*

To Be Specified:
❏  

Color:  ❏  White   ❏  Bone   ❏  Linen

❏

  Seat: American Standard #5322.011 “Rise and    

     Shine” solid plastic closed front seat with cover.
❏

  Seat: American Standard #5308.014 “Laurel”

     molded closed front seat with cover.
❏

  Alternate Seat:

❏

  Supply with stop:

❑

  

• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested

❑

  

3338.012 Bowl

❑

  

4392.016 Tank

Nominal Dimensions:  
711 x 508 x 743mm 
(28" x 20" x 29-1/4")

Fixture only, seat and supply by others

 

❑

  

4392.500 Tank complete with Aquaguard Liner

❑

  

4392.800 Tank complete with trip lever located 

  on right side

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures - 
  includes Flush Performance, Ball Pass Diameter, 
  Trap Seal Depth and all Dimensions

Revised 2/08