American Standard 4314.016 Dépliant

K95

© 2008 AS America Inc.

356mm

(14)

813mm

(32)

C/L OF OUTLET

1

4

3

m

m

(5

-5

/8

)

FINISHED WALL

286mm

(11-1/4)

19mm ± 6mm

(3/4 ± 1/4)

381mm

(15)

470mm

(18-1/2)

C/L

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

356mm

(14)

159mm

(6-1/4)

16mm

(5/8)

FINISHED 

FLOOR

743mm

(29-1/4)

235mm

(9-1/4)

152mm

(6)

524mm

(20-5/8)

203mm

(8)

SUPPLY

AS

REQ'D

365mm

(14-3/8)

*

To Be Specified:
❏  

Color:  ❏  White   ❏  Bone   ❏  Linen

❏

  Seat: American Standard #5324.019 “Rise and    

     Shine” solid plastic closed front seat with cover.
❏

  Seat: American Standard #5311.012 “Laurel”

     molded closed front seat with cover.
❏

  Alternate Seat:

❏

  Supply with stop:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION 

OF 356MM (14") FROM FINISHED WALL TO C/L OF OUTLET.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 

of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided pages.

❑

  

• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 14" roughing-in
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested

❑

  

3344.017 Bowl

❑

  

4314.016 Tank

Nominal Dimensions:  
813 x 524 x 743mm 
(32" x 20-5/8" x 29-1/4")

Fixture only, seat and supply by others

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures - 
  includes Flush Performance, Ball Pass Diameter, 
  Trap Seal Depth and all Dimensions

Revised 2/08