American Standard 7255 Dépliant
CHANDLER™ AMERICAST™ KITCHEN SINK
DOUBLE BOWL MODEL 7255
SINGLE BOWL MODEL 7162
SINGLE BOWL MODEL 7162
DOUBLE BOWL MODEL 7255
SINGLE BOWL MODEL 7162
Installation
Instructions
Instructions
7 9 1 2 6 6 - 4 0 0 R e v . B
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
BEFORE YOU BEGIN...Unpack new sink and
inspect carefully for damage. Replace the sink
in its original packing carton to protect it until
you are ready to begin installation.
inspect carefully for damage. Replace the sink
in its original packing carton to protect it until
you are ready to begin installation.
™
CUTOUT DIMENSIONS FOR SINK
Recommended Tools & Materials
Silicone Sealant
Putty Knife
Pipe Wrench
Channel Locks
Phillips Screwdriver
Regular Screwdriver
Adjustable Wrench
Drill
Putty Knife
Pipe Wrench
Channel Locks
Phillips Screwdriver
Regular Screwdriver
Adjustable Wrench
Drill
Locate and mark center lines of sink on countertop.
Provide proper clearance under the countertop for
the faucet supply lines and the structural parts of the
cabinet.
Provide proper clearance under the countertop for
the faucet supply lines and the structural parts of the
cabinet.
Cut out correct template and trace the cut line onto
the countertop at the proper location.
the countertop at the proper location.
NOTE: If replacing an existing sink be certain to shut
off water supplies before removing old sink.
off water supplies before removing old sink.
Mineral Spirits
Basin Wrench
Saber Saw
Tubing Cutter
Tape Measure
Hacksaw
Scissors
Basin Wrench
Saber Saw
Tubing Cutter
Tape Measure
Hacksaw
Scissors
27" (686mm)
SINK
OUTLINE
OUTLINE
SINK
OUTLINE
OUTLINE
1/2"TYP.
1/2"TYP.
CUTTING
LINE
LINE
CUTTING
LINE
LINE
CUTOUT FOR NEW INSTALLATION
MODIFICATION REQUIRED TO FIT CHANDLER SINK
INTO A STANDARD 25" X 22" SINK CUTOUT
28" (711mm)
24" (610mm)
Product names listed herein are trademarks of American Standard Inc. unless otherwise noted.
© American Standard Inc. 2003
32" (813mm)
19-1/2" (495mm)
19-1/2" (495mm)
21"
(533mm)
10-1/2"
(267mm)
10-1/2"
(267mm)
21" Radius
(533m
m)
21" Radius
(533mm)
35" (889mm)
1-1/2" (38mm)
1-1/2" (38mm)
CENTER LINE
24" (610mm)
19-1/2" (495mm)
19-1/2" (495mm)
21"
(533mm)
21" Radius
(533m
m)
21" Radius
(533mm)
CENTER LINE
SINK
OUTLINE
OUTLINE
SINK
OUTLINE
OUTLINE
1/2"TYP.
1/2"TYP.
CUTTING
LINE
LINE
CUTTING
LINE
LINE
CUTOUT FOR NEW INSTALLATION
MODIFICATION REQUIRED TO FIT CHANDLER SINK
INTO A STANDARD 33" X 22" SINK CUTOUT
10-1/2"
(267mm)
21"
(533)
22"
(559mm)
22"
(559mm)
36" (914mm)
32" (813mm)
10-1/2"
(267mm)
21"
(533)
Certified to comply with ANSI A112.19.4.M
U.S. Patent No. 4,664,982
Other patents pending.
CAN/C.S.A. B-45
Observe local plumbing and building codes.
U.S. Patent No. 4,664,982
Other patents pending.
CAN/C.S.A. B-45
Observe local plumbing and building codes.