American Standard 6056.205 Dépliant

Q:  How will I know if battery needs  to be replaced?
A:  Valve does not open and sensor blinks 2 times 
interrupted by pause for up to 7 days.

Q:  Why has the flow rate of the faucet reduced 
significantly?
A: Check and clean aerator and strainer.

Q:  There is no flow out of faucet when I'm in the 
sensor range?
A: Check sensor. If sensor blinks 2 times interrupted 
by pause, replace battery, or call 1800-442-1902. 

Q:  Why does the faucet operate the opposite of 
expected-Turns On when not in sensor range, but 
turns off when in sensor range?
A: Sensor wires to solenoid are reversed. Black to - 
& Red to + is correct.

Q:  What is the normal operating pressure range?
A:   Faucet will operate with supply pressures ranging 
from 20-80 psi.

1.  For general cleaning use a damp, soft cloth to clean 
the spout and the sensor.

2. For cleaning dirt use a soft cloth with diluted dish 
washing detergent. Wipe the area using a wet cloth 
and dry using a soft cloth.

Avoid using anything that may scratch the spout 
surface. Never use polishing power, detergent or a 
nylon scrub brush. They will damage the surface of the 
spout or Sensor.

1. Remove ENCLOSURE COVER.

2. Close SUPPLY STOP (5) with 4mm Hex wrench.

Note: Keep water flowing out of faucet while shutting off.

3. Pull off Red (1) and Black (2) CONNECTORS from 

SOLENOID VALVE 

(3).

4. Unthread STRAINER (4) using a 7/16" socket.

5. Pull out the STRAINER (4) and clean with an old  

toothbrush. Rinse thoroughly with water.

6. Install the STRAINER (4) back in its place and 

tighten with a 7/16" socket.

7.  Replace ENCLOSURE COVER. Tighten cover 

screws firmly.

1. Remove AERATOR HOUSING (1) with KEY 

supplied with faucet.

3. Remove AERATOR (2) from HOUSING (1).

2. Clean the AERATOR SCREENS (3) with a old tooth 

brush to remove dirt.

4. Rinse Clean with water. Reassemble and install into 

spout end. Be sure black seal washer is in place.  

8

9

10

M 9 6 8 4 9 8   R e v .   1 . 2

M 9 6 8 4 9 8   R e v .   1 . 2

CHROME      

002

                     

Replace the "YYY" with

appropriate finish code

HOT LINE FOR HELP

For toll-free information and answers to your questions, call:

1 (800) 442-1902

Weekdays 8:00 a.m. to 8:00 p.m. EST

IN CANADA  1-800-387-0369   (TORONTO 1-905-306-1093)

Weekdays 8:00 a.m. to 7:00 p.m. EST

Product names listed herein are trademarks of American Standard Inc.

© American Standard Inc. 2005

FAUCET SUPPLY

HOSE

WASHER

MOUNTING SCREW KIT

U GROMMET

SOLID GROMMET

SUPPLY HOSE

MOUNTING NUT

SENSOR (LAVY)

PUTTY PLATE

SENSOR KIT

ROUND GROMMET

BATTERY 6VCR-P2

CIRCUIT BOARD DC

CIRCUIT BOARD

AC & MULTI AC

POWER SUPPLY

GROMMET

POWER SUPPLY

SOLENOID & SCREWS

FILTER

SUPPLY STOP

SOLENOID SCREWS

10 ft. MULTI EXTENSION WIRE

(for 6057 series only)

2.2 GPM AERATOR
066508-YYY0A

0.5 GPM AERATOR

DC SOLENOID

VALVE ASSEMBLY

AC SOLENOID

VALVE ASSEMBLY

IN MEXICO  01-800-839-12-00