American Standard 3305.000 Dépliant

L1

© 2007 American Standard Inc.

5/06

❏

  

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• EverClean™ anti-microbial ceramic glaze

• Featuring the 

• 16-1/2" rim height for accessible application

• Elongated siphon action jetted bowl

• Fully-glazed 2-1/8" trapway with 2" ball pass

• Generous 9" x 8" water surface area

• Close-coupled tank with flat tank cover for 

  superior storage

• Oversized 3" flush valve with chemical 

  resistant flapper

• Chrome trip lever

• New Speed Connect™ tank-to-bowl 

  coupling system

• New sanitary dam on bowl with four point 

  tank stabilization

• Color matched solid plastic seat with cover

• 2 color-matched bolt caps

• Wax ring gasket with closet bolts
• 100% factory flush tested

Nominal Dimensions:  

30-1/4" x 17-1/4" x 30-1/4"

(768 x 438 x 768mm)

• ASME A112.19.2M for Vitreous China Fixtures - 

  includes Flush Performance, Ball Pass Diameter, 

  Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and 

  Power Supplementary Purchase Specification 

  for Non-Adjustability

   ❏

 Color:    ❏ White    ❏ Bone   

   ❏

  Supply with stop:

FINISHED WALL

FINISHED 

FLOOR

C/L OF OUTLET

SUPPLY

AS

REQ'D.

216mm

(8-1/2)

768mm

(30-1/4)

25mm ± 6mm

(1 ± 1/4) 

102m

m (4)

464mm

(18-1/4)

438mm

(17-1/4)

768mm

(30-1/4)

419mm

(16-1/2)

*203mm

(8)

305mm

(12)

356mm

(14)

213mm

(8-3/8)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

*352mm

(13-7/8)

*152mm

(6)

238mm

(9-3/8)

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 

of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided page