American Standard 4110.800 Dépliant

K85

© 2008 AS America Inc.

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION 

OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 

of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided pages.

254mm

(10)

699mm

(27-1/2)

C/L OF OUTLET

7

0

m

m

(2

-3

/4

)

FINISHED WALL

184mm

(7-1/4)

19mm ± 6mm

(3/4 ± 1/4)

381mm

(15)

470mm

(18-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

305mm

(12)

178mm

(7)

16mm

(5/8)

FINISHED 

FLOOR

762mm

(30)

241mm

(9-1/2)

152mm

(6)

495mm

(19-1/2)

222mm

(8-3/4)

SUPPLY

AS

REQ'D

381mm

(15)

*

To Be Specified:
❏

  Color: ❏  White   ❏  Bone   ❏  Linen   ❏  Silver

                ❏  Fawn Beige   ❏  Black
❏

  Seat: American Standard #5324.019 “Rise and    

     Shine” solid plastic closed front, seat with cover.
❏

  Seat: American Standard #5311.012 “Laurel”

     molded closed front seat with cover.
❏

  Alternate Seat:

❏

  Supply with stop:

❑

  

• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 10" roughing-in
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• AquaForce flushing technology
• Close-coupled tank with raised lip detail on
  tank cover
• Color-matched trip lever
• Speed Connect

®

 tank/bowl coupling system

• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested

❑

  

3459.016 Bowl

❑

  

4110.016 Tank

Nominal Dimensions:  
699 x 495 x 762mm
(27-1/2" x 19-1/2" x 30")

Fixture only, seat and supply by others

❑

  

4110.600 Tank complete w/tank cover 

 

locking device

❑

  

4110.800 Tank complete w/trip lever located on 

 

right hand side

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures - 
  includes Flush Performance, Ball Pass Diameter, 
  Trap Seal Depth and all Dimensions

Revised 2/08