American Standard 4098.100 Dépliant

M44

© 2008 AS America Inc.

Revised 2/08

To Be Specified:
❏

  Color: ❏  White   ❏  Bone   ❏  Linen    

 

       ❏  Silver   ❏  Fawn Beige    ❏  Black

❏

  Seat: American Standard #5324.019 “Rise and

  Shine” (with easy to clean lift-off hinge system)
  solid plastic closed front seat with cover.
❏

  Seat: American Standard #5311.012 “Laurel”

  molded closed front seat with cover.
❏ 

 Alternate Seat:

❏ 

 Supply with Stop:

* Flushmate III tank system by Flushmate

®

 Div. of Sloan Valve Co

❏

 

  • Vitreous china
  • Low-consumption (6.0 Lpf/1.6 gpf)
  • Wall-mounted, back-outlet toilet
  • Elongated bowl
  • Fully-glazed 2" ballpass trapway
  • 10" x 12" water surface area 
  • Pressure-assisted siphon jet action
  • Side-mounted chrome trip lever
  • Close-coupled flushometer tank*
  • Speed Connect

®

 tank/bowl coupling system

  • Sanitary bar on bowl

❏

 

3402.016 Elongated bowl

❏

 

4098.100 Tank complete with coupling  

 

 

components

749 x 495 x 762 mm

(29-1/2" x 19-1/2" x 30")

 

Fixture only, seat and supply by others

Required working pressure range 25 psi - 80 psi

❏

 

4098.700 Tank and tank cover only 

 

with tank cover locking device

❏

 

4098.800 Tank and tank cover only 

 

with right hand trip lever

• ASME A112.19.2 for Vitreous China Fixtures

SUGGEST 1/16" CLEARANCE BETWEEN FACE AT WALL AND BACK OF 

BOWL.

CARRIER FITTING AS REQUIRED TO BE FIGURED AND FURNISHED BY 

OTHERS.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

FOR ADDITIONAL INFORMATION REFER TO INSTALLATION  

 

INSTRUCTIONS SUPPLIED.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within 

the range of tolerances established by ANSI Standard A112.19.2. These 

measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided pages.

14-3/4

(375mm)

9

(229mm)

29-1/2

(749mm)

9

(229mm)

18-1/2

(470mm)

C/L OF SEAT POST HOLES

 5-1/2 (140mm CENTERS)

7-1/2

(191mm)

191mm

(7-1/2)

C/L OF WASTE

OUTLET

(4) 7/8

(22mm) DIA. HOLES

SUPPLY AS

REQUIRED

*

5/8

(16mm)

3-1/4

(83mm)

1-1/2

(38mm)

5-1/4

(133mm)

3-7/8

(98mm)

FINISHED WALL

FIN.

 FLOOR

3-1/4

(83mm)

3/4 (19mm)

REF.

6

(152mm)

8-1/2

(216mm)

19-1/2

(495mm)

3/4 

± 1/4

(19mm 

± 6mm)

C/L

30

(762mm)

OR

32

(813mm)

14-1/2

(368mm)

OR

16-1/2

(419mm)

4-1/8

(105mm)

OR

6-1/8

(156mm)

When installed so top of seat is 432 to 483mm (17" to 19") from the
finished floor.