American Standard 2384.012 Dépliant

Pagina di 2
K67
Revised 2/08
© 2008 AS America Inc.
CADET
®
 3 ROUND FRONT
ROUGH-IN TOILET 
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 
SEPARATELY.
*
 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is 
assumed for use of superseded or voided pages.
CADET
®
 3 ROUND FRONT TOILET
  
2384.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
•  EverClean
®
 surface inhibits the growth of  
stain- and odor-causing bacteria, mold,  
and mildew on the surface
• Features the 
Cadet
® 
3 Flushing System
• Space saving round front siphon action
  jetted bowl
• Fully-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for 
  superior storage
• Oversized 3" flush valve with chemical 
  resistant flapper
• Chrome trip lever
• Speed Connect
®
 tank-to-bowl 
  coupling system
• Sanitary dam on bowl with four point 
  tank stabilization
• 2 color-matched bolt caps
• 100% factory flush tested
• 5 year warranty
  
3011.016 Round Front Bowl
  
4021.016 Tank
Nominal Dimensions:  
718 x 438 x 733mm (28-1/4" x 17-1/4" x 28-7/8")
Fixture only, seat and supply by others
Alternative Tank Configurations Available:
  
4021.500 Tank complete with Aquaguard Liner
  
4021.600 Tank complete with tank cover 
      locking device
  
4021.700 Tank complete with Aquaguard Liner 
      and tank cover locking device
  
4021.800 Tank complete with trip lever located 
      on right side
  
4021.900 Tank complete with tank cover locking  
      device and trip lever located on right side
   
4021.950 Tank complete with Aquaguard liner, 
tank cover locking devise, and trip lever on  
right side
 
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures - 
  includes Flush Performance, Ball Pass Diameter, 
  Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power    
  Supplementary Purchase Specification for
  Non-Adjustability
To Be Specified:
 Color: ❏ White  ❏ Bone  ❏ Silver  ❏ Linen  ❏ Black
  Seat: #5330.010 Round front Champion
®
 Slow Close   
     solid plastic seat and cover with easy lift off feature
   Seat: #5282.011 Round Front EverClean
®
 solid  
plastic seat and cover
   Seat: #5320.110 EverClean
®
 Round Front Seat with 
Slow Close Snap-Off Hinges
  Supply with stop:
SEE REVERSE FOR ADDITIONAL ROUGHING-IN 
DIMENSIONS