American Standard 2359.012 Dépliant

Pagina di 1
K90
© 2008 AS America Inc.
COLONY™ RIGHT HEIGHT™ 
ELONGATED 12" ROUGH-IN TOILET
VITREOUS CHINA
COLONY™ RIGHT HEIGHT™ ELONGATED
12" ROUGH-IN TOILET
  
2359.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• AquaForce flushing technology
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
  
3370.016 Bowl
  
4392.016 Tank
Nominal Dimensions:  
756 x 508 x 781mm 
(29-3/4" x 20" x 30-3/4")
Fixture only, seat and supply by others
Alternate Tank Configurations Available:
  
4392.500 Tank complete with Aquaguard Liner
  
4392.800 Tank complete with trip lever located 
  on right side
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -  
  includes Flush Performance, Ball Pass Diameter,  
  Trap Seal Depth and all Dimensions
305mm
(12)
756mm
(29-3/4)
C/L OF OUTLET
7
6
m
m
(3
-1
/4
)
FINISHED WALL
229mm
(9)
19mm ± 6mm
(3/4 ± 1/4)
419mm
(16-1/2)
470 mm
(18-1/2)
C/L
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
311mm
(12-1/4)
178mm
(7)
16mm
(5/8)
FINISHED 
FLOOR
781mm
(30-3/4)
235mm
(9-1/4)
152mm
(6)
508mm
(20)
203mm
(8)
SUPPLY
AS
REQ'D
375mm
(14-3/4)
*
To Be Specified:
❏  
Color:  ❏  White
  Seat: American Standard #5324.019 “Rise and    
     Shine” solid plastic closed front seat with cover.
  Seat: American Standard #5311.012 “Laurel”
     molded closed front seat with cover.
  Alternate Seat:
  Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION 
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 
SEPARATELY.
IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is 
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND 
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE 
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 2/08