American Standard 2903.018W Dépliant

HIGH GLOSS ACRYLIC

❏

2903.018W Whirlpool
• Acrylic with fiberglass reinforcement
•  Pre-leveled tub bottom
• Dual, molded-in arm rests
• 1.5 HP, single speed, self-draining pump/motor
•  Factory installed power cord and plug
• Eight multi-directional and flow-adjustable jets

including:

- Two foot jets
- Four body massage jets
- Two recessed back-rest jets

• Deck-mounted air switch On/Off
• Two silent air volume controls
•  Quick Connect Safe-T-Heater connection

system

• Factory installed and tested whirlpool system

❏

•  Same as 2903.018W except with the 

StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®

❏

Nominal Dimensions: 60 x 42-1/4 x 21-1/4
(1524 x 1073 x 540mm)

© 2005 American Standard Inc.

BV-8

Rev. 9/05

NOTE:  Roughing-in dimensions and product
specifications shown on reverse side of page.

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage 

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density

❏

Color:  (specify color)

❏

Bath Faucet (specify finish)

❏

Rotary Drain:  1583.470 (specify finish)

❏

Safe-T-Heater*: 9075.120

❏

Jet Trim Ring Kit:  9860.200-two per kit 

(specify finish) for Body Massage Jets only

For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.

* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation.  It will not heat cold water to
desired bathing temperature.