American Standard 2998.012 Dépliant

K53

© 2006 American Standard Inc.

Revised 5/05

 NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 
SEPARATELY.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT:  Dimensions of fi xtures are nominal and may vary within the range 
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is 
assumed for use of superseded or voided pages.

305mm

(12)

756mm

(29-3/4)

C/L OF OUTLET

83mm

(3-1/4)

FINISHED WALL

225mm
(8-7/8)

19mm ± 6mm
(3/4 ± 1/4)

419mm

(16-1/2)

470mm

(18-1/2)

C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)

311mm

(12-1/4)

178mm

(7)

16mm

(5/8)

FINISHED 
FLOOR

813mm

(32)

235mm

(9-1/4)

152mm

(6)

495mm

(19-1/2)

254mm

(10)

SUPPLY

AS

REQ'D

375mm

(14-3/4)

*

 

 To Be Specifi ed:
❏  Color:

❏  Seat: American Standard #5324.019 “Rise and    
     Shine" solid plastic closed front, seat with cover.
❏  Seat: American Standard #5311.012 “Laurel"
     molded closed front seat with cover.
❏  Alternate Seat:

❏  Supply with stop:

❑

  2998.012

• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• AquaForce fl ushing technology
• Fully glazed 2" trapway
• Close-coupled tank with raised lip detail on
 tank cover
• Color-matched trip lever
• Speed Connect™ tank/bowl coupling system
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory fl ush tested

 

❑

  3417.016 Bowl

 

❑

  4112.016 Tank

❑

  2998.164 with Slotted Rim for Bedpan holding

 

❑

  3417.164 Bowl

 

❑

  4112.016 Tank

❑

  4112.300 Tank complete with chrome all metal 

 trip 

lever

❑

  4112.500 Tank complete with Aquagard liner

❑

  4112.600 Tank complete with tank cover

 locking 

device

❑

  4112.700 Tank complete with Aquagard liner and 

 

tank cover locking device

❑

  4112.800 Tank complete with trip lever located  

 

on right side

❑

  4112.900 Tank complete with tank cover device   

 

and trip lever located on right side

Nominal Dimensions:  
756 x 495 x 813mm (29-3/4" x 19-1/2" x 32")
Fixture only, seat and supply by others

Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -  
  includes Flush Performance, Ball Pass Diameter, 
  Trap Seal Depth and all Dimensions