American Standard 3111.216 Dépliant

K41

© 2006 American Standard Inc.

 NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION 
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 
SEPARATELY.

IMPORTANT:  Dimensions of fi xtures are nominal and may vary within the range 
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is 
assumed for use of superseded or voided pages.

444mm

(17-1/2)

C/L OF SEAT POST HOLES
140mm (5-1/2) CENTERS

381mm

(15)

768mm

(30-1/4)

216mm (8-1/2")

25mm ± 6mm
(1 ± 1/4)

FINISHED WALL

159mm

(6-1/4)

C/L OF OUTLET

344mm

(13-9/16)

13mm

(1/2)

90mm

(3-9/16")

305mm

(12)

794mm

(31-1/4)

486mm

(19-1/8)

406mm

(16)

279mm

(11)

152mm

(6)

SUPPLY AS

REQUIRED

FINISHED
FLOOR

*

222mm

(8-3/4)

*

C/L

 

 To Be Specifi ed:
❏  Color:

❏  Seat: American Standard #5322.011 “Rise and    
     Shine" solid plastic, closed front, round front seat     
     with cover.
❏  Alternate Seat: American Standard #5308.014 
     “Laurel" molded closed front seat with cover.
❏  Supply with stop:

Revised 5/05

❑

  2408.016

• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl with fully  
  glazed 2" trapway
• AquaForce fl ushing technology
• Antique Chrome trip lever
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory fl ush tested
• Design coordinated to Retrospect 
 Collection Sinks

❑

  3111.216 Bowl

❑

  4393.016 Tank

Nominal Dimensions: 
768 x 486 x 794mm
(30-1/4" x 19-1/8" x 31-1/4")

Fixture only, seat and supply by others 

Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -  
  includes Flush Performance, Ball Pass Diameter, 
  Trap Seal Depth and all Dimensions