American Standard 2096.333 Dépliant

© 2004 American Standard Inc.

10

VITREOUS CHINA

• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• One-piece toilet features a higher (427mm

16-13/16”) bowl for added comfort

• Elongated siphon action bowl and tank

with unique space-saving feature  

• Fits into the same space as a conventional

round front toilet

• Color-matched trip lever
• Internal trapway area fully glazed
• Includes color-matched Rise and Shine™

plastic seat and cover (#5324.019) with
easy-to-clean lift-off hinge system

• 2 bolt caps
• 100% factory flush tested

❏

❏

• Right-hand trip lever

Nominal Dimensions:  
692 x 457 x 699mm
(27-1/4" x 18" x 27-1/2")

Fixture only, supply by others

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M (and 19.6M) for Vitreous

China Fixtures - includes Flush Performance,
Ball Pass Diameter, Trap Seal Depth and 
all Dimensions

To Be Specified

❏

Color:

❏

Supply with stop:

76mm

(3)

FINISHED WALL

16mm
(5/8)

427mm

(16-13/16)

184mm

(7-1/4)

13mm
(1/2)

481mm

(18-15/16)

692mm

(27-1/4)

164mm

(6-7/16)

243mm

(9-9/16)

305mm

(12)

C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTERS

457mm

(18)

FINISHED

FLOOR

*

152mm

(6)

SUPPLY AS

REQUIRED

699mm

(27-1/2)

*

152mm

   (6)

229mm

(9)

368mm

(14-1/2)

C/L

NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12")
FROM FINISHED WALL TO C/L OF OUTLET.

*

DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range of tolerance
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation.  No responsibility is assumed for use
of superseded or voided pages.

●

 When installed, top of seat meets minimum requirement of

432 to 483mm (17" to 19") from the finished floor.  

Revised 10/04

NOTE:  Roughing-in information shown on reverse side of page