Panasonic SC-PT673 Manuale Utente

TX02

Getting S

tarted

Playing

Discs

her Op

era

tions

Reference

Selecting the playback source (continued)

Press [SELECTOR] on the main unit to select source from the main unit.
(

B 39)

[Note]
Confirm the audio connection to the AUX or OPTICAL IN terminal on the
main unit when you select the corresponding sources (

B 9). Reduce the

volume on the TV to its minimum and then balance the TV volume with
the volume setting on the main unit. Refer also to the operating
instructions for your TV to balance the sound.

Select to suit the type of audio from the OPTICAL IN terminal on the main
unit.

(When receiving true 5.1-channel surround sound, select “PCM OFF”.)

[Note]
≥ Audio that is input through the OPTICAL IN terminal is not output from

the HDMI terminal.

≥ Underlined items in the above paragraphs are factory settings.

≥ The following sound effects may not be available or may have no effect

with some sources, or when headphones are used (

B 39).

≥ You may experience a reduction in sound quality when these sound

effects are used with some sources. If this occurs, turn the sound effects
off.

“

ÎPLII” lights in the main unit’s display when there is effect.

Selecting the source by the remote control

DVD/CD (

B 12, 13)

Each time you press the button:
FM (

B 14)

AM (

B 14)

AUX

: For audio input through the AUX

terminal.

D-IN

: For audio input through the

OPTICAL IN terminal. (

B right)

“(TV)” will appear beside “AUX” or “D-IN”,
indicating the TV audio setting for VIERA
Link “HDAVI Control” (

B 24).

iPod (

B 26)

DVD

EXT-IN

RADIO

iPod

Making settings for digital audio input

1 While in “D-IN” mode

Press [SETUP] to select “MAIN/SAP”, “DRC” or “PCM FIX”.

2 While the selected mode is displayed

Press [

3, 4] to make the setting.

MAIN/SAP mode (Only works with Dolby Dual Mono):

MAIN, SAP

, MAIN+SAP

(stereo audio)

“SAP” = Secondary Audio Program

Dynamic Range Compression

DRC ON: Adjust for clarity even when the volume is low by

compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)

DRC OFF: The full dynamic range of the signal is reproduced.

PCM FIX mode

PCM ON: Select when receiving only PCM signals.

PCM OFF: Select when receiving Dolby Digital and PCM signals.

Enjoying sound from all speakers and various
sound effects

VOL

SOUND

SURROUND

-CH SELECT

SETUP

W.SRD

+, VOL

SETUP,

─CH SELECT

SURROUND

SOUND

W.SRD

Enjoying surround sound effects

SURROUND OUTPUT indicator on the main
unit will light up when there is surround
sound effect.

Each time you press the button:
STANDARD:
Sound is output as it was recorded/encoded.
Speaker output varies depending on the
source.
MULTI–CH:
You can enjoy sound from the front
speakers, as well as the surround speakers
even when playing a 2-channel sound or
non-surround sound.
MANUAL: (

B below)

While “MANUAL” is
displayed

Select other surround modes.

Each time you press [

2, 1]:

PLII MOVIE

Suitable for movie software, or softwares
recorded in Dolby Surround.

PLII MUSIC

Adds 5.1-channel effects to stereo
sources.

S.SRND

You can enjoy sound from all speakers
with stereo sources. (Surround output will
be in mono.)

STEREO

Sound will only be output to the front
speakers and the subwoofer from any
source.

Recommended modes to enjoy TV audio or stereo
sources from all speakers:

≥ PLII MOVIE
≥ PLII MUSIC
≥ S.SRND

SURROUND

RQTX0210-1P_670-673_Eng.book Page 16 Friday, April 3, 2009 2:48 PM