Panasonic SC-PTX5 Manuale Utente

R

QTX

00

14

[Note]

≥ The following sound effects may not be available or have no effect with 

some sources, or when headphones are used (

➜ page 11).

≥ You may experience a reduction in sound quality when these sound effects 

are used with some sources. If this occurs, turn the sound effects off.

Cancel (no effect is added).

HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT:

For background music.

≥ To check the current setting, press [EQ].

You can enhance low-frequency sound so that heavy bass sound can be 
heard clearly, even if the acoustics of your room are not optimal. The unit 
automatically selects the most suitable setting according to the type of 
playback source.

Each time you press the button:
H.BASS ON

,------.H.BASS OFF

The setting you make is retained, and recalled every time you play from 
the same type of source.

You can adjust the amount of bass. The unit automatically selects the 
most suitable setting according to the type of playback source.

You can select the level from “SUB W 1” (weakest) to “SUB W 4” (strongest).

≥ To check the current setting, press [SUBWOOFER LEVEL].
≥ The setting you make is retained, and recalled every time you play the 

same type of source.

You can enjoy a surround sound effect similar to 5.1 ch (Dolby Digital or 
DTS) with any audio source, using the included front speakers and the 
subwoofer. You can also enjoy a surround sound effect with stereo 
sources such as CDs.

ÎVS].

Each time you press the button:
REFERENCE: Standard mode 
WIDE: Wide 

Widens the acoustic field of the front speakers. This has a 
good effect when there is little space between the 
speakers.

Cancel (no effect is added)

≥ Dolby Virtual Speaker is not available and “ERROR” is displayed under 

the following conditions:
– During play, when the selector is set to “DVD/CD” and the audio 

source currently playing is in the 3.1 ch, 3 ch, 1.1 ch or 1 ch.

– When you are playing DVD-Audio content which prohibits down-

mixing.

– When headphones are connected.

≥ “ÎPLII” lights when when Dolby Virtual Speaker is turned on and the 

play source is 2 ch.

≥ The Dolby Virtual Speaker LED may turn off depending on the FL 

Dimmer settings (

➜ page 25).

You can play an external source through your home theater system.

Preparation
Confirm the audio connection to the AUX terminal on the main unit.

≥ Reduce the volume on the television to its minimum, and then adjust the 

volume of the main unit.

≥ You can enjoy surround sound effect when you press [ÎVS] to turn on 

Dolby Virtual Speaker (

➜ above).

(Continued on next page)

H.BASS

SUBWOOFER

LEVEL

VS

CM SKIP

0014En_p26-40.fm  Page 31  Friday, June 8, 2007  12:14 PM