Panasonic SC-BTT790 Manuale Utente

Pagina di 56
Reference
47
VQT3Z79
Cannot switch audio.
¾
When audio is output from the HDMI AV OUT 
terminal, set “Dolby D/Dolby D +/Dolby 
TrueHD”, “DTS/DTS-HD” or “MPEG Audio” to 
“PCM”. (> 36)
No sound from the TV.
¾
Press [EXT-IN] to select the corresponding 
source. (> 20)
¾
When connecting the unit to a TV using an 
HDMI cable, check whether the HDMI 
terminal on the TV is labelled “HDMI (ARC)”. 
If not labelled in this way, connect using the 
HDMI cable in combination with an optical 
digital audio cable. (> 13)
¾
If there is no sound from the equipment 
connected to this unit’s DIGITAL AUDIO IN 
terminal, please make sure that the optical 
audio output of the equipment is set to PCM.
Disc cannot be played.
¾
The disc is dirty. (> 5)
Still pictures (JPEG) do not play back 
normally.
¾
The images that were edited on the PC, such 
as Progressive JPEG, etc., may not be played 
back.
I can’t play back BD-Live.
¾
The SD card is write-protected. (> 7)
¾
Confirm that this unit is connected to the 
broadband Internet. (> 16)
¾
Confirm the “BD-Live Internet Access” 
settings. (> 39)
¾
Confirm an SD card is inserted into the SD 
card slot. (> 20)
Alternative soundtrack and subtitles cannot 
be selected.
¾
The languages are not recorded on the disc.
¾
You may not be able to use the Option menu 
to change the soundtrack and subtitles on 
some discs. Use the disc’s menus to make 
changes. (> 24)
Cannot charge or operate.
¾
Check that the iPod/iPhone is connected 
firmly. (> 26)
¾
The battery of the iPod/iPhone is depleted. 
Charge the iPod/iPhone, and then operate 
again.
¾
When unexpected operation occurs while 
using the iPod/iPhone, connect the iPod/
iPhone again or try to restart the iPod/iPhone.
Cannot display iPod/iPhone videos/photos on 
the TV.
¾
Make sure that TV is connected to the VIDEO 
OUT terminal on this unit. (> 14)
¾
Operate the iPod/iPhone menu to make the 
appropriate video/photo output settings for 
your TV. (Refer to operating instructions for 
your iPod/iPhone.)
The TV input channel unintentionally changes 
to HDMI input.
¾
When the main unit is connected with an 
“HDAVI Control” compatible TV and VIDEO 
IN is selected for iPod/iPhone video or photo 
playback, the TV input channel will 
automatically change to the HDMI input 
channel when [HOME] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Distorted sound or noise is heard.
¾
Adjust the position of the antenna.
A beat sound is heard.
¾
Try to keep a certain amount of distance 
between the antenna and the TV.
Noise is excessive.
¾
Change the audio to be output as monaural.
Press [AUDIO] to select “MONO”.
The sound becomes monaural.
≥ To cancel, press the button again or change 
the frequency.
In normal circumstances, select “AUTO STEREO”.
Playback
iPod/iPhone operation
Radio
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book  47 ページ  2012年1月19日 木曜日 午前10時34分