Panasonic SC-NE5 Manuale Utente

VQT4X66

20

The following sound effects can be added to the 
audio output.

Press [SOUND] repeatedly to select the effect.

Press [3, 4] to select the setting and then 
press [OK].

≥ You may experience a reduction in sound quality when these 

effects are used with some sources. If this occurs, turn the 
sound effects off.

This is a 24-hour clock.

Press [SETUP] to select “CLOCK”.

Press [3, 4] to set the time and then press 
[OK].

≥ To display the clock, press [SETUP] to select “CLOCK” and 

then press [OK] once. The time is displayed for 10 seconds.
(During standby, press [DISPLAY, iPod MENU] once.)

≥ The clock is reset when there is a power failure or when the 

AC mains lead is removed.

≥ Reset the clock regularly to maintain accuracy.

You can set the timer so this system turns on at a 
certain time every day.
Preparation
Set the clock (l left).

∫ Setting the timer

Press [SETUP] repeatedly to select “TIMER ADJ”.

Press [3, 4] to set the starting time 
(“ON TIME”) and then press [OK].

Press [3, 4] to set the finishing time 
(“OFF TIME”) and then press [OK].

∫ Turn the timer on

Select the music source*

1

 and set the desired 

volume.

Press [SETUP] repeatedly to select “TIMER SET”.

Press [3, 4] to select “SET” and then press 
[OK].

≥ “

F” is displayed.

≥ To turn the timer off, select “OFF”.

Press [Í] to turn this system off.

≥ To display the timer settings, press [SETUP] repeatedly to 

select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if the 
timer is turned on.

≥ During standby, if the timer is turned on, press [DISPLAY, 

iPod MENU] twice to display the settings.

≥ This system can be used as normal after the timer is set, 

however:
– Turn this system to standby mode before the timer start 

time.

– Even if the audio source or the volume is changed, the 

timer will still use the audio source and volume that was 
set when the timer was turned on.

≥ If this system is having a wireless communication problem at 

the set time, an electronic sound may go off instead of the 
set music source. Turn this system off to stop the electronic 
sound.

*1: “CD”, “FM”, “AUX”, “IPOD_DOCK” and “IPOD_PORT” / 

“USB” can be set as the music source.

The sleep timer can turn this system off after a set 
time.

Press [SLEEP] repeatedly to set the time (in 
minutes) and then press [OK].

“SLEEP 30” 

-.

 “SLEEP 60” 

-.

 “SLEEP 90” 

-.

 “SLEEP 120”

^-----------------------

 “OFF” (Cancel) 

(----------------------b

≥ The remaining time is indicated on this system’s display 

except when other operations are performed.

≥ The play timer and sleep timer can be used together. The 

sleep timer always has priority.

Direct-Vocal 
Surround
(D.SURROUND)

“LEVEL 1”, “LEVEL 2” or 
“OFF”.

≥ The factory preset is “OFF”.

Preset EQ
(PRESET EQ)

“HEAVY” (heavy), “SOFT” 
(soft), “CLEAR” (clear), 
“VOCAL” (vocal) or “FLAT” 
(flat/off).

≥ The factory preset is “HEAVY”.

Bass (BASS) or 
Treble (TREBLE)

Adjust the level (j4 to i4).

Dynamic Bass
(D.BASS)

“ON D.BASS” or
“OFF D.BASS”.

≥ The factory preset is 

“ON D.BASS”.

SC-NE5GS~VQT4X66.book  20 ページ  ２０１３年３月２５日　月曜日　午後３時４０分